HELTEC image
HomeProductsESP32-C3 Arduino Development Board

ESP32-C3 Arduino Development Board

Basic ESP32C3 Dev-Board, CH340K USB-UART bridge

BoardWi-FiBLE/BT
01 / 04
$4.90

ESP32-C3 is a development board based on the ESP32-C3FN4 chip.

ESP32-C3FN4 is a 32-bit microprocessor based on RISC-V architecture. It is a very low-power and high-integration MCU system-level chip (SOC), integrating 2.4 GHz Wi-Fi and low-power Bluetooth (Bluetooth® LE) dual-mode wireless communication. Internal integration 4MB flash, contains SPI, I2C, UART, ADC, etc.

It is the best option for smart cities, farms, homes, industrial control, house security, wireless meter reading, and IoT developers.

You May Also Like

Compare Difference

Current product

ESP32-C3 Arduino Development Board

Summary

ESP32-C3 is a development board based on the ESP32-C3FN4 chip.

ESP32-C3FN4 is a 32-bit microprocessor based on RISC-V architecture. It is a very low-power and high-integration MCU system-level chip (SOC), integrating 2.4 GHz Wi-Fi and low-power Bluetooth (Bluetooth® LE) dual-mode wireless communication. Internal integration 4MB flash, contains SPI, I2C, UART, ADC, etc.

It is the best option for smart cities, farms, homes, industrial control, house security, wireless meter reading, and IoT developers.

Main Features

  • Microprocessor: ESP32-C3FN4 (RISC-V architecture 32-bit, main frequency up to 160 MHz)
  • Type-C USB interface with a complete voltage regulator, ESD protection, short circuit protection, RF shielding, and other protection measures;
  • Onboard SH1.25-2 battery interface, integrated lithium battery management system(charge and discharge management, overcharge protection, battery power detection, USB / battery power automatic switching);
  • Integrated WiFi, Bluetooth two network connections, onboard Wi-Fi, Bluetooth dedicated 2.4GHz PCBantenna;
  • Integrated CH340K USB to serial port chip, convenient for program downloading, and debugging information printing;
  • Support the Arduino development environment;
  • With good RF circuit design and basic low-power design (sleep current: 10uA theoretically), it is convenient for IoT application vendors to quickly verify solutions and deploy applications;

Specifications

ParametersDescription
Master ChipESP32-C3FN4(32-bit@RISC-V architecture)
USB to Serial ChipCH340K
WiFi802.11 b/g/n, up to 150Mbps
Bluetooth LEBluetooth 5, Bluetooth mesh
Hardware Resource5*ADC1+1*ADC2; 2*UART; 1*I2C; 3*SPI; etc.
Memory384KB ROM; 400KB SRAM; 8KB RTC SRAM; 4MB SiP Flash
InterfaceType-C USB; 2*1.25 lithium battery interface, 2*11*2.54 Header Pin
Battery3.7V lithium battery power supply and charging
Power consumptionDeep Sleep 3.5uA
Operating Temperature-20~70℃
Dimensions40.64 × 20.32 × 7.6 mm

Description

Pin Map

ESP32-C3 Development Board Pin Map

High light

USB Type C

ESP32-C3 USB Type C

The power supply, firmware download, and debugging interfaces adopt a more universal USB Type C interface, making development work more convenient.

Arduino-Compatible

Arduino development environment

We have done a lot of migration and development, made it perfectly support Arduino®, can run the LoRaWAN protocol stably.

Docs & Resource

Packing list

The default packing list without selecting any accessories is as follows:

ItemQuantity
ESP32-C3x1

Contact

Markdown is supported. Switch between editing and previewing your message.

Message0/5000
From
$4.90