Arduino-Compatible
We have done a lot of migration and development, made it perfectly support Arduino®, can run the LoRaWAN protocol stably.
ESP32C3 + SX1262 LoRa Node, Wi-Fi, Meshtastic and LoRaWAN Compatible
HT-CT62 is a LoRa/LoRaWAN node module with a long communication range, low power consumption, high sensitivity, and low cost. The module is composed of ESP32-C3FH4 (32-bit microprocessor based on RISC-V architecture) and Semtech LoRa Transceivers (SX1262). The module integrates 2.4 GHz Wi-Fi and LoRa two-mode wireless communication. HT-CT62 is a small volume, stamp hole package module, it’s the best choice for smart cities, smart farms, smart homes, and IoT makers.
Current product
HT-CT62 Wi-Fi LoRa SoM
HT-CT62 is a LoRa/LoRaWAN node module with a long communication range, low power consumption, high sensitivity, and low cost. The module is composed of ESP32-C3FH4 (32-bit microprocessor based on RISC-V architecture) and Semtech LoRa Transceivers (SX1262). The module integrates 2.4 GHz Wi-Fi and LoRa two-mode wireless communication. HT-CT62 is a small volume, stamp hole package module, it’s the best choice for smart cities, smart farms, smart homes, and IoT makers.
| Parameters | Description |
|---|---|
| Master Chip | ESP32-C3FH4 (32-bit@RISC-V architecture) |
| WiFi | 802.11 b/g/n, up to 150Mbps |
| LoRa Chip | SX1262 |
| Frequency | 470 ~ 510MHz, 863 ~ 928MHz |
| Max. TX Power | 21±1dBm |
| Max. Receiving Sensitivity | -134dBm |
| Hardware Resource | 5 * ADC1+1 * ADC2; 2 * UART; 1 * I2C; 3 * SPI; 15 * GPIO; etc. |
| Memory | 384KB ROM; 400KB SRAM; 8KB RTC SRAM; 4MB SPI Flash |
| Interface | 2.4G ANT (IPEX1.0); LoRa ANT(IPEX1.0); 2 * 11 * 1.27 spacing Stamp hol |
| Power Consumption | Deep Sleep 10uA |
| Operating Temperature | -40~85 ℃ |
| Dimensions | 17.78 * 17.78* 2.8mm |

The default packing list without selecting any accessories is as follows:
| Item | Quantity |
|---|---|
| HT-CT62 | x1 |
When you use the USB to Serial tool, you need to connect the serial port pins 20/21 of the device, and 17/18 when you connect directly via USB.
The high temperature may cause the shielding shell of the device to shift, resulting in a short circuit.
Please select Wireless Mini Shell.
Customer reviews for this product will appear here when available.
Markdown is supported. Switch between editing and previewing your message.
HT-CT62 is a LoRa/LoRaWAN node module with a long communication range, low power consumption, high sensitivity, and low cost. The module is composed of ESP32-C3FH4 (32-bit microprocessor based on RISC-V architecture) and Semtech LoRa Transceivers (SX1262). The module integrates 2.4 GHz Wi-Fi and LoRa two-mode wireless communication. HT-CT62 is a small volume, stamp hole package module, it’s the best choice for smart cities, smart farms, smart homes, and IoT makers.
| Parameters | Description |
|---|---|
| Master Chip | ESP32-C3FH4 (32-bit@RISC-V architecture) |
| WiFi | 802.11 b/g/n, up to 150Mbps |
| LoRa Chip | SX1262 |
| Frequency | 470 ~ 510MHz, 863 ~ 928MHz |
| Max. TX Power | 21±1dBm |
| Max. Receiving Sensitivity | -134dBm |
| Hardware Resource | 5 * ADC1+1 * ADC2; 2 * UART; 1 * I2C; 3 * SPI; 15 * GPIO; etc. |
| Memory | 384KB ROM; 400KB SRAM; 8KB RTC SRAM; 4MB SPI Flash |
| Interface | 2.4G ANT (IPEX1.0); LoRa ANT(IPEX1.0); 2 * 11 * 1.27 spacing Stamp hol |
| Power Consumption | Deep Sleep 10uA |
| Operating Temperature | -40~85 ℃ |
| Dimensions | 17.78 * 17.78* 2.8mm |

The default packing list without selecting any accessories is as follows:
| Item | Quantity |
|---|---|
| HT-CT62 | x1 |
When you use the USB to Serial tool, you need to connect the serial port pins 20/21 of the device, and 17/18 when you connect directly via USB.
The high temperature may cause the shielding shell of the device to shift, resulting in a short circuit.
Please select Wireless Mini Shell.
Customer reviews for this product will appear here when available.
Markdown is supported. Switch between editing and previewing your message.