Compact Size for Easy Integration
• Compact dimension: 40.10 × 23.82 × 12.54 mm.
• B2B interface facilitates easy integration.
nRF52840,BLE, LoRa, Meshtastic, MeshCore, LoRaWAN
The RadioCore series is a quasi-system-level development platform. With an ultra-compact form factor, it can flexibly adapt to various MCUs and RF modules for diverse IoT scenarios. As a model in this series, the RC52-62 integrates the Nordic nRF52840 MCU and SX1262 RF chip. It supports BLE and LoRa, delivering both long and short-range communication alongside ultra-low power consumption.
Current product
RadioCore RC52
The RadioCore series is a quasi-system-level development platform. With an ultra-compact form factor, it can flexibly adapt to various MCUs and RF modules for diverse IoT scenarios. As a model in this series, the RC52-62 integrates the Nordic nRF52840 MCU and SX1262 RF chip. It supports BLE and LoRa, delivering both long and short-range communication alongside ultra-low power consumption.
| Parameters | Description |
|---|---|
| MCU | nRF52840 (BLE) |
| LoRa Chip | SX1262 |
| Interface | USB-C, BTB, 2 x 10 Pin Headers, IPEX 4.0(LoRa) |
| Bluetooth | Bluetooth 5.0 LE |
| Hardware Resource | USB 2.0, 4 * SPI, 2 * TWI, 2 * UART, 4 * PWM, QSPI, I2S, PDM, QDEC |
| Memory | 1MB Flash, 256KB SRAM |
| Power Supply | USB-C 5V, 3.3V Pin Header, 3.3-4.2V Vbat |
| Operating Temperature | -30 ~ 80 °C |
| Consumption | Sleep: 7μA , Transmission: 164mA@22dBm |
| Dimensions | 40.10 x 23.82 x 12.54 mm |
| Weight | 8.5g |


The default packing list without selecting any accessories is as follows:
| Item | Quantity |
|---|---|
| RadioCore | x1 |
| LoRa Antenna | x1 |
| Pin Header | x2 |
| Pin Sticker | x2 |
| IP2X4.0-SMA Adapter Cable | x1(Accessory Package) |
| SH1.25×2 Battery Connector | x1(Accessory Package) |
| RD02G Adapter Board | x1(Accessory Package) |
The RC52 comes pre-soldered with the SX1262. The RC52 cannot work with the Wi-Fi HaLow module.
The main unit of the device does not come with a dedicated lithium battery interface. However, lithium battery power supply can be achieved in the following two ways:
1.There is a dedicated battery pin, VBAT, on the pin header.
2.We offer a matching baseboard for battery adaptation, which integrates a 1.25-2P lithium battery connector.
Please refer to the datasheet of the corresponding sub-model RC52 Datasheet
Customer reviews for this product will appear here when available.
Markdown is supported. Switch between editing and previewing your message.
The RadioCore series is a quasi-system-level development platform. With an ultra-compact form factor, it can flexibly adapt to various MCUs and RF modules for diverse IoT scenarios. As a model in this series, the RC52-62 integrates the Nordic nRF52840 MCU and SX1262 RF chip. It supports BLE and LoRa, delivering both long and short-range communication alongside ultra-low power consumption.
| Parameters | Description |
|---|---|
| MCU | nRF52840 (BLE) |
| LoRa Chip | SX1262 |
| Interface | USB-C, BTB, 2 x 10 Pin Headers, IPEX 4.0(LoRa) |
| Bluetooth | Bluetooth 5.0 LE |
| Hardware Resource | USB 2.0, 4 * SPI, 2 * TWI, 2 * UART, 4 * PWM, QSPI, I2S, PDM, QDEC |
| Memory | 1MB Flash, 256KB SRAM |
| Power Supply | USB-C 5V, 3.3V Pin Header, 3.3-4.2V Vbat |
| Operating Temperature | -30 ~ 80 °C |
| Consumption | Sleep: 7μA , Transmission: 164mA@22dBm |
| Dimensions | 40.10 x 23.82 x 12.54 mm |
| Weight | 8.5g |


The default packing list without selecting any accessories is as follows:
| Item | Quantity |
|---|---|
| RadioCore | x1 |
| LoRa Antenna | x1 |
| Pin Header | x2 |
| Pin Sticker | x2 |
| IP2X4.0-SMA Adapter Cable | x1(Accessory Package) |
| SH1.25×2 Battery Connector | x1(Accessory Package) |
| RD02G Adapter Board | x1(Accessory Package) |
The RC52 comes pre-soldered with the SX1262. The RC52 cannot work with the Wi-Fi HaLow module.
The main unit of the device does not come with a dedicated lithium battery interface. However, lithium battery power supply can be achieved in the following two ways:
1.There is a dedicated battery pin, VBAT, on the pin header.
2.We offer a matching baseboard for battery adaptation, which integrates a 1.25-2P lithium battery connector.
Please refer to the datasheet of the corresponding sub-model RC52 Datasheet
Customer reviews for this product will appear here when available.
Markdown is supported. Switch between editing and previewing your message.

B2B expansion board designed specifically for RadioCore series, GNSS connector, battery, 2 x B2B IIC sensor slot
$6.90
B2B expansion board designed specifically for RadioCore series, 3 x B2B IIC sensor slot
$5.90
Expansion board designed specifically for RadioCore series, 2 channels PWM output servo driver extension adapter, B2B connector and 2.54 header
$5.90
2 channel relay extension adapter, B2B connector
$9.90
WS2812 RGB LED strip driver extension adapter, B2B connector and 2.54 header, need external power supply
$5.90
1.08 inch TFT with 2.54 header, transparent plastic protective case
$6.90
RadioCore Servo Adapter Board, compatible with RC32 and RCC6main controllers.
$6.90