Compact Size for Easy Integration
- Compact dimension:40.10x23.82×12.54mm.
- B2B interface facilitates easy integration.
RadioCore ESP32-S3 LoRa Wi-Fi HaLow, Meshtastic, MeshCore, LoRaWAN
The RadioCore series is a quasi-system-level development platform that enables flexible integration of various MCUs and RF modules within an ultra-compact form factor, making it well suited for a wide range of IoT applications.
The RC32, a model in this series, is equipped with the Espressif ESP32-S3 R8 and supports 2.4 GHz Wi-Fi, Bluetooth 5.0, and BLE connectivity. It also allows flexible integration of additional RF modules—such as LoRa, Wi-Fi HaLow, and others—based on specific application requirements.

nRF52840,BLE, LoRa, Meshtastic, MeshCore, LoRaWAN
$15.90
ESP32S3R8 + SX1262 LoRa Node, Meshtastic, MeshCore and LoRaWAN Compatible
$21.90
ESP32S3 + SX1262 LoRa Node, 0.96 inch OLED display, Meshtastic, MeshCore, Mesh networking and LoRaWAN Compatible
$17.90
nRF52840 + SX1262, 9-axis IMU, buzzer, GNSS and TFT display, IP65 protection, compatible with Heltec F&T, Meshtastic and MeshCore.
$39.90Current product
RadioCore RC32
The RadioCore series is a quasi-system-level development platform that enables flexible integration of various MCUs and RF modules within an ultra-compact form factor, making it well-suited for a wide range of IoT applications.
The RC32, a model in this series, is equipped with the Espressif ESP32-S3 R8 and supports 2.4 GHz Wi-Fi, Bluetooth 5.0, and BLE connectivity. It also allows flexible integration of additional RF modules—such as LoRa, Wi-Fi HaLow, and others—based on specific application requirements.
| Parameters | Description |
|---|---|
| MCU | ESP32-S3R8 (Wi-Fi/BLE) |
| Compatible RF | SX1262 (LoRa), MM6108Q (WiFi HaLow) |
| Interface | USB-C; BTB; 2 x 10 Pin Headers, IPEX 4.0(LoRa), IPEX 1.0(WiFi HaLow) |
| Wi-Fi | IEEE 802.11 b/g/n(2.4GHz,WiFi4) |
| Hardware Resource | 3 × UART, 2 × I2C, 2 × I2S, 2 × General SPI; 2 × SPI dedicated for Flash/PSRAM, TWAI® (CAN 2.0, ISO11898-1 compatible), LCD interface + DVP camera interface (8~16 bit), SD/MMC host (2 slots), USB Serial/JTAG controller |
| Interface | Type-C USB, B2B, 2 x 10 x 2.54 Header Pin |
| Power Supply | USB-C 5V, 3.3V Pin Header, 3.3-4.2V Vbat |
| Operating Temperature | -30 ~ 80 ℃ |
| Dimensions | 40.10 x 23.82 x 12.54 mm |
| Weight | 8.5g |


The default packing list without selecting any accessories is as follows:
| Item | Quantity |
|---|---|
| RadioCore | x1 |
| LoRa Antenna | x1 |
| 1.25-2P Connector | x1 |
| 2.54*10 Header Pin | x2 |
| Pin Sticker | x2 |
| IP2X4.0-SMA Adapter Cable | x1(Kit Version) |
| 2.54*10 Header Pin | x1 (Kit Version) |
If you select RC32, it does not include long-range communication modules such as LoRa or Wi‑Fi HaLow.
RC32‑62 is equipped with the SX1262 LoRa module.
RC32‑68 comes with the MM6108Q Wi‑Fi HaLow module.
The Basic Version does not include the RD02G expansion board, while the Kit Version comes with it. The RD02G does not add new functions. It only provides a 1.25-2P lithium battery connector, a 1.25-8P GNSS connector, and 2 B2B sensor interfaces.
The RF module requires SMT mounting. Replacement is feasible if you have the SMT capability and solder the pins correctly.
The main unit of the device does not come with a dedicated lithium battery interface. However, lithium battery power supply can be achieved in the following two ways:
1.There is a dedicated battery pin, VBAT, on the pin header.
2.We offer a matching baseboard for battery adaptation, which integrates a 1.25-2P lithium battery connector.
Please refer to the datasheet of the corresponding sub-model for wireless module pin definitions. RC32 Datasheet
Please refer to the datasheet of the corresponding sub-model RC32 Datasheet
Customer reviews for this product will appear here when available.
Markdown is supported. Switch between editing and previewing your message.

nRF52840,BLE, LoRa, Meshtastic, MeshCore, LoRaWAN
$15.90
ESP32S3R8 + SX1262 LoRa Node, Meshtastic, MeshCore and LoRaWAN Compatible
$21.90
ESP32S3 + SX1262 LoRa Node, 0.96 inch OLED display, Meshtastic, MeshCore, Mesh networking and LoRaWAN Compatible
$17.90
nRF52840 + SX1262, 9-axis IMU, buzzer, GNSS and TFT display, IP65 protection, compatible with Heltec F&T, Meshtastic and MeshCore.
$39.90The RadioCore series is a quasi-system-level development platform that enables flexible integration of various MCUs and RF modules within an ultra-compact form factor, making it well-suited for a wide range of IoT applications.
The RC32, a model in this series, is equipped with the Espressif ESP32-S3 R8 and supports 2.4 GHz Wi-Fi, Bluetooth 5.0, and BLE connectivity. It also allows flexible integration of additional RF modules—such as LoRa, Wi-Fi HaLow, and others—based on specific application requirements.
| Parameters | Description |
|---|---|
| MCU | ESP32-S3R8 (Wi-Fi/BLE) |
| Compatible RF | SX1262 (LoRa), MM6108Q (WiFi HaLow) |
| Interface | USB-C; BTB; 2 x 10 Pin Headers, IPEX 4.0(LoRa), IPEX 1.0(WiFi HaLow) |
| Wi-Fi | IEEE 802.11 b/g/n(2.4GHz,WiFi4) |
| Hardware Resource | 3 × UART, 2 × I2C, 2 × I2S, 2 × General SPI; 2 × SPI dedicated for Flash/PSRAM, TWAI® (CAN 2.0, ISO11898-1 compatible), LCD interface + DVP camera interface (8~16 bit), SD/MMC host (2 slots), USB Serial/JTAG controller |
| Interface | Type-C USB, B2B, 2 x 10 x 2.54 Header Pin |
| Power Supply | USB-C 5V, 3.3V Pin Header, 3.3-4.2V Vbat |
| Operating Temperature | -30 ~ 80 ℃ |
| Dimensions | 40.10 x 23.82 x 12.54 mm |
| Weight | 8.5g |


The default packing list without selecting any accessories is as follows:
| Item | Quantity |
|---|---|
| RadioCore | x1 |
| LoRa Antenna | x1 |
| 1.25-2P Connector | x1 |
| 2.54*10 Header Pin | x2 |
| Pin Sticker | x2 |
| IP2X4.0-SMA Adapter Cable | x1(Kit Version) |
| 2.54*10 Header Pin | x1 (Kit Version) |
If you select RC32, it does not include long-range communication modules such as LoRa or Wi‑Fi HaLow.
RC32‑62 is equipped with the SX1262 LoRa module.
RC32‑68 comes with the MM6108Q Wi‑Fi HaLow module.
The Basic Version does not include the RD02G expansion board, while the Kit Version comes with it. The RD02G does not add new functions. It only provides a 1.25-2P lithium battery connector, a 1.25-8P GNSS connector, and 2 B2B sensor interfaces.
The RF module requires SMT mounting. Replacement is feasible if you have the SMT capability and solder the pins correctly.
The main unit of the device does not come with a dedicated lithium battery interface. However, lithium battery power supply can be achieved in the following two ways:
1.There is a dedicated battery pin, VBAT, on the pin header.
2.We offer a matching baseboard for battery adaptation, which integrates a 1.25-2P lithium battery connector.
Please refer to the datasheet of the corresponding sub-model for wireless module pin definitions. RC32 Datasheet
Please refer to the datasheet of the corresponding sub-model RC32 Datasheet
Customer reviews for this product will appear here when available.
Markdown is supported. Switch between editing and previewing your message.

B2B expansion board designed specifically for RadioCore series, GNSS connector, battery, 2 x B2B IIC sensor slot
$6.90
B2B expansion board designed specifically for RadioCore series, 3 x B2B IIC sensor slot
$5.90