HELTEC image
HomeProductsWiFi LoRa 32 (V2) [Phasedout]

WiFi LoRa 32 (V2) [Phasedout]

ESP32 + SX127X LoRa Node, Meshtastic and LoRaWAN compatible. (Phaseout product, not recommended for new design)

BoardLoRaWi-FiBLE/BT
01 / 02
$17.90

WiFi LoRa 32 is a classic IoT dev-board designed & produced by Heltec Automation(TM), it’s a highly integrated product based on ESP32 + SX127x, it has Wi-Fi, BR/EDR/BLE, LoRa functions, Li-Po battery management system and 0.96 OLED. It’s the best choice for smart cities, smart farms, smart home, and IoT makers.

Phaseout products, recommend replacement:

Compare Difference

Current product

WiFi LoRa 32 (V2) [Phasedout]

Summary

WiFi LoRa 32 is a classic IoT dev-board designed & produced by Heltec Automation(TM), it’s a highly integrated product based on ESP32 + SX127x, it has Wi-Fi, BLE, LoRa functions, Li-Po battery management system and 0.96 OLED. It’s the best choice for smart cities, smart farms, smart home, and IoT makers.

Main Features

  • Microprocessor: ESP32D0 (dual-core 32-bit MCU + ULP core), with LoRa node chip SX1276/SX1278.
  • Micro USB interface with a complete voltage regulator, ESD protection, short-circuit protection, RF shielding, and other protection measures.
  • Onboard SH1.25-2 battery interface, integrated lithium battery management system (charge and discharge management, overcharge protection, battery power detection, USB / battery power automatic switching).
  • Onboard 0.96-inch 128*64 dot matrix OLED display can be used to display debugging information, battery power, and other information.
  • Integrated WiFi, LoRa, Bluetooth three network connections, onboard Wi-Fi, Bluetooth dedicated 2.4GHz metal spring antenna, reserved IPEX (U.FL) interface for LoRa use.
  • Integrated CP2102 USB-to-serial port chip, convenient for program downloading and debugging information printing.
  • Supports the Arduino development environment.
  • With good RF circuit design and basic low-power design(sleep current ≤ 800uA).

Specifications

ParametersDescription
Master ChipESP32 (240MHz Tensilica LX6 dual-core+1 ULP, 600 DMIPS)
LoRa Node ChipSX1276/SX1278
USB to Serial ChipCP2102
Frequency433 ~ 510MHz, 863 ~ 923MHz
Max. TX Power19±1dBm
Receiving sensitivity-135dBm
Wi-Fi802.11 b/g/n, up to 150Mbps
BluetoothBluetooth V4.2 BR/EDR and Bluetooth LE specification
Hardware Resource22 * GPIO; · 3 * UART; · 2 * I2C; · 2 * SPI;
Memory520KB internal SRAM; · 8MB Spi Flash
InterfaceMicro USB x 1; · LoRa ANT(IPEX1.0); · 2 * 18 * 2.54 Header Pin
Battery3.7V lithium (SH1.25 x 2 socket)
Operating Temperature-20 ~ 70 ℃
Dimensions51 * 25.5* 10.6 mm

Pin Map

High light

USB Type C

The power supply, firmware download, and debugging interfaces adopt a more universal USB Type C interface, making development work more convenient.

1 / 3

Packing list

The default packing list without selecting any accessories is as follows:

ItemQuantity
WiFi LoRa 32 (V2)x1
LoRa Antennax1
1.25×2 Battery Connectorx1

Contact

Markdown is supported. Switch between editing and previewing your message.

Message0/5000
From
$17.90