HELTEC image
HomeProductsModule Test and Dev Backplane for Wireless Shell and CT62

Module Test and Dev Backplane for Wireless Shell and CT62

USB Type C socket and CP2102 on board, integrates a power management chip and a 2.4G antenna

Accessories
01 / 03
$6.90

It is specifically used to connect the backplane of the Wireless Shell V3 and CT62 module, through this cheap backplane, most of the pins of the Wireless Shell v3 are exposed. At the same time, it integrates USB interface, two buttons, and a lithium battery interface to facilitate your development with Wireless Shell V3.

Compatible module:

Compare Difference

Current product

Module Test and Dev Backplane for Wireless Shell and CT62

Before You Buy

This product is an adapter board only, the compatible module must be purchased separately.

Summary

It is specifically used to connect the backplane of the Wireless Shell V3 module, through this cheap backplane, most of the pins of the Wireless Shell v3 are exposed. At the same time, it integrates USB interface, two buttons, and a lithium battery interface to facilitate your development with Wireless Shell V3.

Main Features

  • Compatible with, Wireless shell, HT-CT62.
  • Onboard 2.4 GHz WiFi antenna.
  • Include 1.25-2P battery connecter.

Specifications

ParametersDescription
InterfaceUSB Type-C
Battery Interface1.25-2P
Input Voltage5V
Main Board Voltage3V3
Temperature-40~85℃
Humidity≤90% no condensation
Dimension28x60mm

Packing list

ItemQuantity
ESP32 Dev Backplanex1

Contact

Markdown is supported. Switch between editing and previewing your message.

Message0/5000
From
$6.90