HELTEC image
HomeProductsWireless Shell (V3) Wi-Fi LoRa SoM

Wireless Shell (V3) Wi-Fi LoRa SoM

ESP32S3 + SX1262 LoRa Node, Meshtastic and LoRaWAN Compatible

ModuleLoRaWi-FiBLE/BT
01 / 03
$11.90

HTIT-Wsh(Wireless shell) is a long communication range, high receive sensitivity, low power consumption(9uA) and low cost LoRa node module. The HTIT-Wsh is composed up of an MCU (ESP32-S3FN8) and Semtech LoRa Transceivers (SX1262). 38.4 x 16.1 x 3.2(mm) size with 1.27mm stamp holes package makes it can be assembled into your PCB or products directly.
HTIT-Wsh is provide Wi-Fi, BLE and LoRa solution, perfectly support Arduino®. Users can easily carry out secondary development and application.

Compared to Wireless Shell (V2), V3 has made the following upgrades:

ItemWireless Shell (V2)Wireless Shell (V3)
MCUESP32-D0ESP32-S3
LoRa Node ChipSX1276SX1262
Crystal OscillatorOrdinary crystal oscillatorHigh precision temperature compensated crystal oscillator
Low Power Features in Deep Sleep30uA<10uA
Other UpdateBetter impedance matching of RF circuits.

You May Also Like

Compare Difference

Current product

Wireless Shell (V3) Wi-Fi LoRa SoM

Summary

Wireless shell is a long communication range, high receive sensitivity, low power consumption(9uA) and low cost LoRa node module. The HTIT-Wsh is composed up of an MCU (ESP32-S3FN8) and Semtech LoRa Transceivers (SX1262). 38.4 x 16.1 x 3.2(mm) size with 1.27mm stamp holes package makes it can be assembled into your PCB or products directly.
HTIT-Wsh is provide Wi-Fi, BLE and LoRa solution, perfectly support Arduino®. Users can easily carry out secondary development and application.

Main Features

  • Microprocessor:ESP32-S3FN8 (Xtensa ® 32-bit LX7 dual core processor, five stage pipeline rack Structure, main frequency up to 240 MHz), with LoRa node chip SX1262;
  • RF shielding (contain a shield shell) and other protection measures;
  • Integrated WiFi, LoRa, Bluetooth network connections, both of them are IPEX socket;
  • Support the Arduino development environment;
  • (Exclusive) Supports the Arduino version of the ESP32 + LoRaWAN protocol routine provided by Heltec. This is a standard LoRaWAN protocol that can communicate with any gateway/base station running the LoRaWAN protocol (requires serial number activation, only the development of the company) The board is available, the serial number can be queried onthis page);
  • With good RF circuit design and basic low-power design (sleep current: 9uA theoretically), it is convenient for IoT application vendors to quickly verify solutions and deploy applications.

Specifications

ParametersDescription
MCUESP32-S3FN8 (Xtensa®32-bit lx7 dual core processor)
LoRa ChipSX1262
Frequency433 ~ 510MHz, 863 ~ 928MHz
Max. TX Power21±1dBm
Max. Receiving Sensitivity-139dBm
Wi-Fi802.11 b/g/n, up to 150Mbps
Bluetooth LEBluetooth 5, Bluetooth mesh
Hardware Resource7 * ADC1 + 8 * ADC2; · 9 * Touch; 3 * UART; 2 * I2C; 2 * SPI
InterfaceLoRa ANT(IPEX1.0); 2.4G ANT (IPEX1.0); 1.27 spacing Stamp hole.
Operating Temperature-40 ~ 85 ℃
Dimensions38.4 * 16.1* 2.8 mm

Pin Map

Highlight

Arduino-Compatible

We have done a lot of migration and development, made it perfectly support Arduino®, can run the LoRaWAN protocol stably.

1 / 2

Packing list

The default packing list without selecting any accessories is as follows:

ItemQuantity
Wireless Shellx1

Contact

Markdown is supported. Switch between editing and previewing your message.

Message0/5000
From
$11.90