Mini PCIe
Mini PCIe Interface, can be very convenient to integrate in a variety of PCB.
HC01P V2 WiFi HaLow Module Mini PCIe Interface
HT-HC01 module, MM6108, SPI bus
HT-HC01P-V2 is a Wi-Fi HaLow module with mini PCIe interface, which operates in 863-870MHz and 902 – 928MHz, up to 1-2km transmission range. It meets IEEE 802.11ah standard, which is specifically designed for battery-operated devices, allowing them to remain in longer sleep and idle states without frequent wake-ups. This significantly reduces power consumption and extends the device’s battery life.
You May Also Like

HT-H7608 V2 Wi-Fi HaLow 802.11ah Router / Gateway
MTK7628 Processor and MM6108, 27 ± 2 dBm high TX power Wi-Fi HaLow gateway, Ethernet
$79.00
Wi-Fi HaLow Dongle V2 802.11ah Long Range Wireless Network Bridge
802.11ah Long Range Wireless Network Bridge, MT7628 + MM6108, 27 ± 2 dBm high TX power
$69.90
Wi-Fi HaLow Camera HAT for Raspberry Pi
HT-HC01 MM6108 HaLow Module, OV5647 Camera
$39.00
HT-HC33 V2 ESP32 Wi-Fi HaLow Camera
ESP32S3 + MM6108 module, OV3660
$23.90
RS-CP01 PIR & Camera RadioCore Gadget
PIR camera gadget based on RadioCore, OV3660. ESP32 + MM6108, 3D printed case
$20.90Compare Difference
Current product
HC01P V2 WiFi HaLow Module Mini PCIe Interface
Summary
Note: 868MHz only offers 1MHz bandwidth and a maximum transmit power of 16dBm. 915MHz, however, provides 1/2/4/8MHz bandwidth options and a maximum transmit power of 27±1dBm.
HT-HC01P-V2 is a Wi-Fi HaLow module with mini PCIe interface, which operates in 863-870MHz and 902 – 928MHz, up to 1-2km transmission range. It meets IEEE 802.11ah standard, which is specifically designed for battery-operated devices, allowing them to remain in longer sleep and idle states without frequent wake-ups. This significantly reduces power consumption and extends the device’s battery life.
Main Features
- Long-range transmission, up to 1km or and further within the visual distance.
- Channel bandwidth options of 1/2/4/8 MHz.
- Support frequency bands: 863-870MHz, 902~928 MHz.
- Max output power:27±1dBm.
- Hibernate mode (internal / external wake).
- 802.11ah OFDM PHY supporting WFA HaLow certification.
- 802.11ah MAC supporting WFA HaLow certification.
- High data rate, single-stream max. data rate of 32.5 Mbps @ 8 MHz or 15 Mbps @ 4 MHz channel.
- Wide spectrum of security features.
Specifications
| Parameters | Description |
|---|---|
| Main Chip | MM6108IQ |
| Power Supply | 3.3V |
| HaLow Standard | IEEE 802.11ah |
| Band Width | 1/2/4/8MHz |
| Interface | Mini PCIe |
| Operating temperature | -40 ~ 85℃ |
| Operating humidity | 10% ~ 90%, no-condensing |
| Dimensions | 50.95 * 30.00 * 3.75 mm |
| Max. PHY Data Rate | 32.5 Mbps |
Application
Wi-Fi HaLow can seamlessly integrate with traditional Wi-Fi or Ethernet networks and is suitable for most IoT scenarios, especially those requiring long-range high-speed transmission.
- Smart Home and City
- Industrial automation control
- Asset management and tracking
- WiFi-HaLow Gateway and Proximity sensors
- Old device Information upgrade
- Wi-Fi/Ethernet/Wi-Fi_HaLow extension and bridging
- Rural internet access and LAN construction
- WiFi HaLow device development
- Remote camera monitoring and Network blind spot coverage
- Digital transformation of legacy equipment
Pin Map

High light
Dimensions

Packing list
The default packing list without selecting any accessories is as follows:
| Item | Quantity |
|---|---|
| HT-HC01P | x1 |
FAQ
Q01What are the requirements for SPI host?
When selecting a CPU host to interface via SPI to the MM6108-MF08551 module, consider the following recommendations to achieve the best throughput:
- The host should support level-triggered interrupts.
- The host should support full-duplex SPI mode.
- The host should support DMA backed transactions on the SPI bus.
Q02What are the precautions for digital interfaces?
All unused digital IO pins must be pulled up or down to ensure they do not float. Failure to do so will result in a higher leakage current on the VDDIO supply.
Q03SDK
We recommend using the official Morse Micro development environment. Please ensure to select the “bcf_mf08551.bin” configuration file, as other configuration files may result in abnormal RF power output.
No Reviews Yet
Customer reviews for this product will appear here when available.
Contact
Markdown is supported. Switch between editing and previewing your message.


