Plug&play
-
If you purchase in pairs, they will come with factory matching, plug and play.
-
You can connect your device to the Dongle through three methods:
- USB Type C.
- Ethernet.
- 2.4GHz Wi Fi.
802.11ah Long Range Wireless Network Bridge, MT7628 + MM6108, 27 ± 2 dBm high TX power
This long-range communicator based on Wi-Fi HaLow can replace Ethernet cables in certain scenarios. IEEE 802.11ah protocol, HT-HD01 operates in the unlicensed SUB-1G frequency band (902–928 MHz). It offers four bandwidth modes (1/2/4/8 MHz), with a maximum transmit power of 27±1 dBm and data rates of up to 32.5 Mbps@8M.

MTK7628 Processor and MM6108, 27 ± 2 dBm high TX power Wi-Fi HaLow gateway, Ethernet
$79.00
MM6108 + FEM, 27±1 dBm high TX power
$11.90
HT-HC01 module, MM6108, SPI bus
$11.50
RadioCore ESP32-S3 LoRa Wi-Fi HaLow, Meshtastic, MeshCore, LoRaWAN
$9.90
HT-HC01 MM6108 HaLow Module, OV5647 Camera
$39.00
ESP32S3 + MM6108 module, OV3660
$23.90Current product
Wi-Fi HaLow Dongle V2 802.11ah Long Range Wireless Network Bridge
This long-range communicator based on Wi-Fi HaLow can replace Ethernet cables in certain scenarios. IEEE 802.11ah protocol, HT-HD01 operates in the unlicensed SUB-1G frequency band (902–928 MHz). It offers four bandwidth modes (1/2/4/8 MHz), with a maximum transmit power of 27±1 dBm and data rates of up to 32.5 Mbps@8M.
Info: The HD01 has been fully upgraded to V2, with a transmission power of 27±1 dBm


| Parameters | Description |
|---|---|
| MCU | MT7628 |
| Wi-Fi | IEEE 802.11b/g/n |
| Wi-Fi HaLow | IEEE 802.11ah · Frequency: 902-928MHz · Max. TX power: 21±1 dBm(V1),27±1dBm(V2) · Bandwidth: 1/2/4/8 MHz · Max Data Rate: 32.5 Mbps @ 8 MHz |
| ANT Interface | SMA female socket |
| Ethernet | RJ45(10/100M),USB-C |
| Operating Condition | Temperature: -20 ~ +70℃ Humidity: 10%~90%( no-condensing) |
| Power | USB-C, 5V |
| Consumption | 700mA(Typical) |
| Ingress Protection | Without waterproof treatment |
| Shell material | Aluminum Alloy, Plastic |
| Weight | 53.5g (Antenna included),40g(Antenna excluded) |
| Dimensions | 87.5 * 32.5 * 20mm(Antennaexcluded) |

The default packing list without selecting any accessories is as follows:
| Item | Quantity |
|---|---|
| Wi-Fi HaLow Dongle AP(Only valid when selecting AP configuration) | x1 |
| Wi-Fi HaLow Dongle STA(Only valid when selecting STA configuration) | x1 |
| Wi-Fi HaLow Dongle AP+STA(Only valid when selecting AP+STA configuration) | x1 |
| Antenna | x1 |
| USB-C cable | x1 |
| Reset button trigger pin | x1 |
| Paper user guide | x1 |
| Ethernet jumper | x1 |
The hardware is completely identical, only the firmware downloaded is different. AP and STA can be converted to each other
Do not enter the configuration mode via Wi-Fi while connecting the network cable. If this situation occurs, please unplug the power and network cable, and then re-enter the configuration mode.
Yes, AP can be directly connected to routers through Ethernet cables.
Yes.
You can check by observing the silk print on the device: V1 and V1.1 are 21±1 dBm, while V2 is 27±1 dBm.
Regarding the 868MHz version of HaLow, considering European regulations, HaLow operating in the 868MHz band can only reach speeds of less than 2Mbps. Therefore, it cannot be used for video transmission like the 915MHz band version.
However, this speed is still suitable for many application or IoT scenarios. We have recently completed the debugging of the 868MHz version of the HC01(V2) module and are preparing to launch the 868MHz version of the HT-M7608 gateway, which will be available in early February.
Customer reviews for this product will appear here when available.
Markdown is supported. Switch between editing and previewing your message.

MTK7628 Processor and MM6108, 27 ± 2 dBm high TX power Wi-Fi HaLow gateway, Ethernet
$79.00
MM6108 + FEM, 27±1 dBm high TX power
$11.90
HT-HC01 module, MM6108, SPI bus
$11.50
RadioCore ESP32-S3 LoRa Wi-Fi HaLow, Meshtastic, MeshCore, LoRaWAN
$9.90
HT-HC01 MM6108 HaLow Module, OV5647 Camera
$39.00
ESP32S3 + MM6108 module, OV3660
$23.90This long-range communicator based on Wi-Fi HaLow can replace Ethernet cables in certain scenarios. IEEE 802.11ah protocol, HT-HD01 operates in the unlicensed SUB-1G frequency band (902–928 MHz). It offers four bandwidth modes (1/2/4/8 MHz), with a maximum transmit power of 27±1 dBm and data rates of up to 32.5 Mbps@8M.
Info: The HD01 has been fully upgraded to V2, with a transmission power of 27±1 dBm


| Parameters | Description |
|---|---|
| MCU | MT7628 |
| Wi-Fi | IEEE 802.11b/g/n |
| Wi-Fi HaLow | IEEE 802.11ah · Frequency: 902-928MHz · Max. TX power: 21±1 dBm(V1),27±1dBm(V2) · Bandwidth: 1/2/4/8 MHz · Max Data Rate: 32.5 Mbps @ 8 MHz |
| ANT Interface | SMA female socket |
| Ethernet | RJ45(10/100M),USB-C |
| Operating Condition | Temperature: -20 ~ +70℃ Humidity: 10%~90%( no-condensing) |
| Power | USB-C, 5V |
| Consumption | 700mA(Typical) |
| Ingress Protection | Without waterproof treatment |
| Shell material | Aluminum Alloy, Plastic |
| Weight | 53.5g (Antenna included),40g(Antenna excluded) |
| Dimensions | 87.5 * 32.5 * 20mm(Antennaexcluded) |

The default packing list without selecting any accessories is as follows:
| Item | Quantity |
|---|---|
| Wi-Fi HaLow Dongle AP(Only valid when selecting AP configuration) | x1 |
| Wi-Fi HaLow Dongle STA(Only valid when selecting STA configuration) | x1 |
| Wi-Fi HaLow Dongle AP+STA(Only valid when selecting AP+STA configuration) | x1 |
| Antenna | x1 |
| USB-C cable | x1 |
| Reset button trigger pin | x1 |
| Paper user guide | x1 |
| Ethernet jumper | x1 |
The hardware is completely identical, only the firmware downloaded is different. AP and STA can be converted to each other
Do not enter the configuration mode via Wi-Fi while connecting the network cable. If this situation occurs, please unplug the power and network cable, and then re-enter the configuration mode.
Yes, AP can be directly connected to routers through Ethernet cables.
Yes.
You can check by observing the silk print on the device: V1 and V1.1 are 21±1 dBm, while V2 is 27±1 dBm.
Regarding the 868MHz version of HaLow, considering European regulations, HaLow operating in the 868MHz band can only reach speeds of less than 2Mbps. Therefore, it cannot be used for video transmission like the 915MHz band version.
However, this speed is still suitable for many application or IoT scenarios. We have recently completed the debugging of the 868MHz version of the HC01(V2) module and are preparing to launch the 868MHz version of the HT-M7608 gateway, which will be available in early February.
Customer reviews for this product will appear here when available.
Markdown is supported. Switch between editing and previewing your message.

863~870 MHz, 902~928MHz SMA antenna
$3.90