Low Power Consumption
with excellent signal penetration, ensuring robust performance even in challenging environments
ESP32S3 + MM6108 module, OV3660
HT-HC33 is a development board with integrated camera, based on the ESP32-S3 MCU and Wi-Fi HaLow module.It is designed for long-range, high-speed wireless communication. With support for transmission distances of over 1 km and speeds of up to 32 Mbps, it is ideal for IoT applications that require reliable, high-performance connectivity.
The module features alow power consumption design with excellent signal penetration, ensuring robust performance even in challenging environments. The integrated camera has a 200-pixel wide-angle, which supports advanced image processing functions such as auto exposure control, auto gain control, image scaling, and image compression.

HT-HC01 module, MM6108, SPI bus
$11.50
802.11ah Long Range Wireless Network Bridge, MT7628 + MM6108, 27 ± 2 dBm high TX power
$69.90
MTK7628 Processor and MM6108, 27 ± 2 dBm high TX power Wi-Fi HaLow gateway, Ethernet
$79.00
PIR camera gadget based on RadioCore, OV3660. ESP32 + MM6108, 3D printed case
$20.90
HT-HC01 MM6108 HaLow Module, OV5647 Camera
$39.00Current product
HT-HC33 V2 ESP32 Wi-Fi HaLow Camera
HT-HC33 is a camera-integrated dev board equipped with an ESP32-S3 MCU and a Wi-Fi HaLow module. It is designed for long-range, high-speed wireless communication. The latest V2 version boosts the transmit power to 27±1 dBm, with a maximum transmission range of 1 km and a peak TCP speed of 6.5 Mbps at short distances.
Due to the limited processing speed of the ESP32 itself, video performance is not ideal; this product is better suited for applications involving still photography.
| Parameters | Description |
|---|---|
| MCU | ESP32-S3R8 |
| Wi-Fi HaLow Module | HT-HC01; HT-HC01_V2 (MM6108Q) |
| Serial port chip | CP2102 |
| Wi-Fi HaLow | IEEE 802.11ah |
| Memory | 384KB ROM; 512KB SRAM; 16KB RTC SRAM; 8M PSRAM, 16MB SPI Flash |
| Interface | HaLow ANT(IPEX1.0); 2 * 15 * 2.54 Header Pins, 24P_0.5mm FFC connector(camera), USB TypeC, SH1.25-2 battery interface, Micro-SD card holder |
| Power Supply | 5V@USB, 2.7~4.2V@battery |
| Operating temperature | -30 ~ +85℃ |
| Operating humidity | 10%~90%, no-condensing |
| Dimensions | 60.00 * 33.50 * 7.10mm3(Unincluded Camera) |
Wi-Fi HaLow can seamlessly integrate with traditional Wi-Fi or Ethernet networks and is suitable for most IoT scenarios, especially those requiring long-range high-speed transmission.


The default packing list without selecting any accessories is as follows:
| Item | Quantity |
|---|---|
| HT-HC33 | x1 |
| A camera | x1 |
| 2.54 *15 Header Pin | x2 |
| 1.25×2 Battery Connector | x1 |
| Antenna | x1 |
Each IO pin is preconfigured with IO_MUX functionality, which means you can use any GPIO as I2C or SPI pins. You just need to define these pins in your code. However, it’s important to note that once a pin is used, it may affect other functions associated with that pin.
include Wi-Fi, Bluetooth, and Wi-Fi HaLow, with an onboard 2.4 GHz patch antenna for Wi-Fi and Bluetooth, as well as a reserved IPEX (U.FL) interface.
The HC33 model has a different camera and adds a 2.4G IPEX connector.
Customer reviews for this product will appear here when available.
Markdown is supported. Switch between editing and previewing your message.

HT-HC01 module, MM6108, SPI bus
$11.50
802.11ah Long Range Wireless Network Bridge, MT7628 + MM6108, 27 ± 2 dBm high TX power
$69.90
MTK7628 Processor and MM6108, 27 ± 2 dBm high TX power Wi-Fi HaLow gateway, Ethernet
$79.00
PIR camera gadget based on RadioCore, OV3660. ESP32 + MM6108, 3D printed case
$20.90
HT-HC01 MM6108 HaLow Module, OV5647 Camera
$39.00HT-HC33 is a camera-integrated dev board equipped with an ESP32-S3 MCU and a Wi-Fi HaLow module. It is designed for long-range, high-speed wireless communication. The latest V2 version boosts the transmit power to 27±1 dBm, with a maximum transmission range of 1 km and a peak TCP speed of 6.5 Mbps at short distances.
Due to the limited processing speed of the ESP32 itself, video performance is not ideal; this product is better suited for applications involving still photography.
| Parameters | Description |
|---|---|
| MCU | ESP32-S3R8 |
| Wi-Fi HaLow Module | HT-HC01; HT-HC01_V2 (MM6108Q) |
| Serial port chip | CP2102 |
| Wi-Fi HaLow | IEEE 802.11ah |
| Memory | 384KB ROM; 512KB SRAM; 16KB RTC SRAM; 8M PSRAM, 16MB SPI Flash |
| Interface | HaLow ANT(IPEX1.0); 2 * 15 * 2.54 Header Pins, 24P_0.5mm FFC connector(camera), USB TypeC, SH1.25-2 battery interface, Micro-SD card holder |
| Power Supply | 5V@USB, 2.7~4.2V@battery |
| Operating temperature | -30 ~ +85℃ |
| Operating humidity | 10%~90%, no-condensing |
| Dimensions | 60.00 * 33.50 * 7.10mm3(Unincluded Camera) |
Wi-Fi HaLow can seamlessly integrate with traditional Wi-Fi or Ethernet networks and is suitable for most IoT scenarios, especially those requiring long-range high-speed transmission.


The default packing list without selecting any accessories is as follows:
| Item | Quantity |
|---|---|
| HT-HC33 | x1 |
| A camera | x1 |
| 2.54 *15 Header Pin | x2 |
| 1.25×2 Battery Connector | x1 |
| Antenna | x1 |
Each IO pin is preconfigured with IO_MUX functionality, which means you can use any GPIO as I2C or SPI pins. You just need to define these pins in your code. However, it’s important to note that once a pin is used, it may affect other functions associated with that pin.
include Wi-Fi, Bluetooth, and Wi-Fi HaLow, with an onboard 2.4 GHz patch antenna for Wi-Fi and Bluetooth, as well as a reserved IPEX (U.FL) interface.
The HC33 model has a different camera and adds a 2.4G IPEX connector.
Customer reviews for this product will appear here when available.
Markdown is supported. Switch between editing and previewing your message.

863~870 MHz, 902~928MHz SMA antenna
$3.90
SMA antenna and its corresponding IPEX-SMA adapter cable
$0.90
IPEX (V1) - SMA converter cable, RF1.13
$0.90
MM6108 + FEM, 27±1 dBm high TX power
$11.90