HELTEC image
HomeProductsCapsule Sensor V3

Capsule Sensor V3

Portable LoRaWAN sensor, ESP32S3 + SX1262, integrated battery and antenna

DeviceLoRaWi-FiBLE/BTGNSS
01 / 07
$29.00$25.90

Capsule Sensor V3 is a tiny portable LoRa/LoRaWAN device based on ESP32-S3 and SX1262. Modular design allows it to adapt to different sensors, so you can easily build applications without being an expert in IoT.

Thanks to WirelessBoot technology, Capsule Sensor V3 is small, stylish, waterproof, and has a 250mA rechargeable battery, making it perfect for complex environments. Whether you want to build your applications or run open-source programs like Meshtastic, Capsule Sensor V3 is a great choice.

The Capsule Sensor accommodates all your belongings, including guitars, pianos, other musical instruments, cigar humidors, wine cellars, incubators, greenhouses, art, family heirlooms, refrigerators, and freezers, benefiting from meticulous and precise monitoring.

You May Also Like

Compare Difference

Current product

Capsule Sensor V3

Summary

Due to its small battery capacity, this product is not well-suited for mesh networking scenarios; it is better suited for LoRaWAN applications.

Capsule Sensor V3 is a tiny portable LoRa/LoRaWAN device based on ESP32-S3 and SX1262. The modular design allows it to adapt to different sensors, so you can easily build applications without being an expert in IoT.

Thanks to WirelessBoot technology, Capsule Sensor V3 is small, stylish, waterproof, and has a 250mA rechargeable battery, making it perfect for complex environments. Whether you want to build your applications or run open-source programs like Meshtastic, Capsule Sensor V3 is a great choice.

The Capsule Sensor accommodates all your belongings, including guitars, pianos, other musical instruments, cigar humidors, wine cellars, incubators, greenhouses, art, family heirlooms, refrigerators, and freezers, benefiting from meticulous and precise monitoring.

Main Features

  • ESP32-S3 + SX1262.
  • LED indicator light.
  • Meshtastic project compatible(It is recommended to use with power bank or mobile phone).
  • High strength plastic, IP65 waterproof.
  • Wireless communication method include Wi-Fi, Bluetooth and LoRa.
  • Built in 250mAh rechargeable battery, magnetic suction charging port.
  • Built in LoRa and Wi-Fi/BLE antennas, stylish appearance, compact and light.
  • Re-development can be done through Arduino, PlatformIO, etc.
  • Support Heltec Wireless Boot system, download firmware, exchange information, and print logs through Wi-Fi.
  • Modular design, with a BTB interface reserved at the bottom, capable of connecting and replacing different sensors.

General Specifications

ParametersDescription
MCUESP32-S3FN8
LoRa ChipSX1262
WiFiIEEE 802.11 b/g/n 2.4GHz
BluetoothBluetooth LE, Bluetooth 5, Bluetooth mesh
LoRa Frequency863~870MHz, · 902~928MHz, · 470~510MHz
Operating Temperature-20~60℃
Max. Receiving. sensitivity-135dBm
Power Supply3.7V lithium battery, 250mAh
Battery life (typical conditions)Over 1 Year
Charging5V, Magnetic suction 2P-2.54mm
Operating Humidity10%~90%RH(Non Condensing)
Max. LoRa TX Power21± 1dBm
Protection gradeIP65
Wireless Range (line of sight, ideal conditions)Over 6 KM

Sensor Specifications

TypeModuleDescription
GNSSQuectel_L76K Sensor Datasheet<1m, L1/L5
Temperature&HumidityGXHTV3 Datasheet±0.5℃ / ±5%RH
3-AxisDA217 Sensor Datasheet±1g
Barometic PressureBMP280±1hPa/±1℃

Dimension

Packing list

The default packing list without selecting any accessories is as follows:

ItemQuantity
CapSule Sensor V3x1
Charging Cablex1
Lanyardx1

Contact

Markdown is supported. Switch between editing and previewing your message.

Message0/5000
From
$29.00$25.90