Wall fixing
With the wall fixing kit, the equipment can be easily fixed to the wall
MTK7628 Processor and SX1302 + SX1255 LoRaWAN gateway, Ethernet, Wi-Fi
HT-M7603 is a high cost-effective indoor standard LoRaWAN gateway, which can be used independently or as a blind filling gateway. With simple configuration, it allows you to bridge LoRa wireless networks to IP networks and different network servers via Wi-Fi or Ethernet.
This gateway has a sleek, contemporary design. It is wall-mounted, can be easily placed anywhere indoor to ensure that it provides adequate signal coverage.

ESP32C3 + SX1262, RS485 to LoRaWAN DTU
$17.90
nRF52840 + SX1262, 9-axis IMU, buzzer, GNSS and TFT display, IP65 protection, compatible with Heltec F&T, Meshtastic and MeshCore.
$39.90
Portable LoRaWAN sensor, ESP32S3 + SX1262, integrated battery and antenna
$25.90
ESP32S3R8 + SX1262 LoRa Node, Meshtastic, MeshCore and LoRaWAN Compatible
$17.90
ESP32S3R8 + SX1262 LoRa Node, Meshtastic, MeshCore and LoRaWAN Compatible
$21.90
nRF52840 +GPS+LoRa Node, Meshtastic, MeshCore and LoRaWAN Compatible
$33.90Current product
HT-M7603 Indoor LoRa Gateway
The HT-M7603 is a cost-effective indoor LoRaWAN gateway that can operate as a standalone unit or help extend coverage in areas with weak signal reception. With simple configuration, it bridges LoRaWAN and IP networks and connects to different network servers via Wi-Fi or Ethernet.
With a sleek, modern design, the HT-M7603 can be wall-mounted or placed anywhere indoors to provide reliable signal coverage.
| Parameters | Description |
|---|---|
| MCU | MTK7628 |
| LoRa Chipset | SX1302 + SX1250 |
| Multi-channel | Eight (8) uplink, one (1) downlink. |
| Frequency | 470 ~ 510/863 ~ 870/902~923MHz |
| Wi-Fi | IEEE 802.11 b/g/n 2.4GHz |
| LoRa RX Sensitivity | -125dBm @125KHz/SF7 · -139dBm @125KHz/SF12 |
| Ethernet | 10/100M |
| Max. TX Power | +27 ± 1dBm |
| Supply Voltage | +5V |
| Operating Temperature | -20 ~ 70℃ |
| Operating Humidity | 10%~90%, no-condensing |
| Dimensions | 116x65x30 mm |
Step. 1 Power ON device

Step. 2 Config network

Step. 3 Connect to a LoRaWAN anetwork server

For more detailed configuration methods, please refer to the HT-M7603 Quick Start documentation
The default packing list without selecting any accessories is as follows:
| Item | Quantity |
|---|---|
| HT-M7603 host device | x1 |
| Suction Cup Glue Rod Antenna | x1 |
| 5V 2A Power Adapter | x1 |
No, because different RF frequencies require different impedance matching, and the operating frequency band of the device must be within the range supported by the hardware.
The following are references for the corresponding working frequency bands of each version:
Yes. But there is no LBT support in the 902~928 version, but if your order address is in Korea, our staff will contact you to confirm if LBT support is needed.
NO.
We have removed the MQTT function in the new firmware because it requires a specific data upload format. That is, when you use the MQTT service, it means the code for your node must also be redeveloped. If you definitely need this feature, please enter the following command in SSH to revert the device to the previous version:
rm -rf reset_M7603_V105* && wget http://minerback.heltec.cn/download/reset_M7603_V105.sh && chmod +x reset_M7603_V105.sh && ./reset_M7603_V105.sh
Customer reviews for this product will appear here when available.
Markdown is supported. Switch between editing and previewing your message.

ESP32C3 + SX1262, RS485 to LoRaWAN DTU
$17.90
nRF52840 + SX1262, 9-axis IMU, buzzer, GNSS and TFT display, IP65 protection, compatible with Heltec F&T, Meshtastic and MeshCore.
$39.90
Portable LoRaWAN sensor, ESP32S3 + SX1262, integrated battery and antenna
$25.90
ESP32S3R8 + SX1262 LoRa Node, Meshtastic, MeshCore and LoRaWAN Compatible
$17.90
ESP32S3R8 + SX1262 LoRa Node, Meshtastic, MeshCore and LoRaWAN Compatible
$21.90
nRF52840 +GPS+LoRa Node, Meshtastic, MeshCore and LoRaWAN Compatible
$33.90The HT-M7603 is a cost-effective indoor LoRaWAN gateway that can operate as a standalone unit or help extend coverage in areas with weak signal reception. With simple configuration, it bridges LoRaWAN and IP networks and connects to different network servers via Wi-Fi or Ethernet.
With a sleek, modern design, the HT-M7603 can be wall-mounted or placed anywhere indoors to provide reliable signal coverage.
| Parameters | Description |
|---|---|
| MCU | MTK7628 |
| LoRa Chipset | SX1302 + SX1250 |
| Multi-channel | Eight (8) uplink, one (1) downlink. |
| Frequency | 470 ~ 510/863 ~ 870/902~923MHz |
| Wi-Fi | IEEE 802.11 b/g/n 2.4GHz |
| LoRa RX Sensitivity | -125dBm @125KHz/SF7 · -139dBm @125KHz/SF12 |
| Ethernet | 10/100M |
| Max. TX Power | +27 ± 1dBm |
| Supply Voltage | +5V |
| Operating Temperature | -20 ~ 70℃ |
| Operating Humidity | 10%~90%, no-condensing |
| Dimensions | 116x65x30 mm |
Step. 1 Power ON device

Step. 2 Config network

Step. 3 Connect to a LoRaWAN anetwork server

For more detailed configuration methods, please refer to the HT-M7603 Quick Start documentation
The default packing list without selecting any accessories is as follows:
| Item | Quantity |
|---|---|
| HT-M7603 host device | x1 |
| Suction Cup Glue Rod Antenna | x1 |
| 5V 2A Power Adapter | x1 |
No, because different RF frequencies require different impedance matching, and the operating frequency band of the device must be within the range supported by the hardware.
The following are references for the corresponding working frequency bands of each version:
Yes. But there is no LBT support in the 902~928 version, but if your order address is in Korea, our staff will contact you to confirm if LBT support is needed.
NO.
We have removed the MQTT function in the new firmware because it requires a specific data upload format. That is, when you use the MQTT service, it means the code for your node must also be redeveloped. If you definitely need this feature, please enter the following command in SSH to revert the device to the previous version:
rm -rf reset_M7603_V105* && wget http://minerback.heltec.cn/download/reset_M7603_V105.sh && chmod +x reset_M7603_V105.sh && ./reset_M7603_V105.sh
Customer reviews for this product will appear here when available.
Markdown is supported. Switch between editing and previewing your message.

863~870 MHz, 902~928MHz SMA antenna
$3.90
N type socket fiberglass omni antenna
$12.90