Low Power Consumption
Meshtastic enter low power consumption mode, the current is only 23uA.
Entering LoRaWAN deep sleep mode, the current is only 11uA
nRF52840 + SX1262 LoRa Node, Meshtastic, MeshCore and LoRaWAN Compatible
Mesh Node T114 is a Power Consumption development board based on the nRF52840 and SX1262, supporting LoRa and Bluetooth 5.0. which integrates various power interfaces (5V USB, lithium battery, and solar panel), an optional 1.14-inch TFT display, and a GPS module as accessories, and features powerful wireless long-distance communication capabilities, scalability, and a low-power design.
With Heltec nRF52 development environment and libraries. You can use it for LoRa/LoRaWAN development work, and also use it to run some open source projects, such as Meshtastic and Meshcore.

ESP32S3R8 + SX1262 LoRa Node, Meshtastic, MeshCore and LoRaWAN Compatible
$21.90
nRF52840 +GPS+LoRa Node, Meshtastic, MeshCore and LoRaWAN Compatible
$33.90
nRF52840 + SX1262, 9-axis IMU, buzzer, GNSS and TFT display, IP65 protection, compatible with Heltec F&T, Meshtastic and MeshCore.
$39.90
ESP32-S3 +GPS+LoRa Node, Meshtastic, MeshCore and LoRaWAN Compatible
$30.90Current product
Mesh Node T114 (Rev. 2.0)
Mesh Node T114 is a Power Consumption development board based on the nRF52840 and SX1262, supporting LoRa and Bluetooth 5.0. which integrates various power interfaces (5V USB, lithium battery, and solar panel), an optional 1.14-inch TFT display, and a GPS module as accessories, and features powerful wireless long-distance communication capabilities, scalability, and a low-power design.
With Heltec nRF52 development environment and libraries. You can use it for LoRa/LoRaWAN development work, and also use it to run some open source projects, such as Meshtastic and Meshcore.


| Parameters | Description |
|---|---|
| MCU | nRF52840 |
| LoRa Node Chip | SX1262 |
| Frequency | 470 ~ 510MHz; 863 ~ 870MHz; 902 ~ 928MHZ. |
| Max. TX Power | 21±1dBm |
| Max. Receiving sensitivity | -135dBm@SF12 BW=125KHz |
| Bluetooth | Bluetooth LE: Bluetooth 5, Bluetooth mesh |
| Hardware Resource | USB 2.0, 4 * SPI, 2 * TWI, 2 * UART, 4 * PWM, QSPI, I2S, PDM, QDEC Etc. |
| Memory | 1M Flash · 256KB SRAM |
| Interface | Type-C USB · 2*1.25 lithium battery connector · 2 * 1.25 solar panel connector · LoRa ANT (IPEX1.0) · 8 * 1.25 GPS module connector · 2 * 13 * 2.54 Header Pin |
| Battery | 3~4.2V battery power supply and charge. |
| Operating Temperature | -20 ~ 70 ℃ |
| Dimensions | 50.80*22.86mm |
| Electrical characteristics | Deep Sleep: ~11uA · Tracker mode sleep: ~22uA · GPS OFF, TFT OFF: ~9mA · GPS OFF, TFT ON: ~20mA · GPS ON, TFT ON: ~51mA |
| Display | onboard 1.14 inch TFT-LCD display |


The default packing list without selecting any accessories is as follows:
| Item | Quantity |
|---|---|
| Mesh Node T114 | x1 |
| LoRa Antenna | x1 |
| SH1.25×2 Battery Connector | x2 |
| 2.54 *13 Header Pin | x2 |
| L76K GNSS (Available when GPS selected) | x1 |
| Protect Shell and Transfer LoRa antenna (Available when Shell selected) | x1 |
The 2.4GHz antenna is a multilayer ceramic antenna for BlueTooth communications, it can’t be replaced.
In addition to Meshtastic support, we have also developed a complete LoRaWAN protocol in the nRF52 Arduino framework.
You can find this type of socket by search “SH1.25 x 2”.
The maximum capacity of the shell for carrying batteries is 42 * 28 * 11mm, and the default 3.7V lithium battery size is 40 * 25 * 10mm
Just download the screenless version firmware and enter the 123456 password.
5V~6.5V, it is recommended to connect solar panels with a voltage of around 5V.
Not time ago, customer reports that some of the Mesh Node T114 works as a Meshtastic device and tries to send long strings (>50 chars) ONLY in Long-Fast mode (SF11, 250K BW), sometimes sending messages may fail.
https://github.com/meshtastic/firmware/issues/4723#issuecomment-2369336696
https://github.com/meshtastic/firmware/issues/4723#issuecomment-2404889735
With our detailed and long time testing, there is NO issue with long packet transmission in versions 433MHz and 470MHz, so they are not included in the compensation list.
But in response to users’ demand for the 433 and 470 hardware V2 versions, our engineers are debugging the corresponding hardware. It will be released soon.
Customer reviews for this product will appear here when available.
Markdown is supported. Switch between editing and previewing your message.

ESP32S3R8 + SX1262 LoRa Node, Meshtastic, MeshCore and LoRaWAN Compatible
$21.90
nRF52840 +GPS+LoRa Node, Meshtastic, MeshCore and LoRaWAN Compatible
$33.90
nRF52840 + SX1262, 9-axis IMU, buzzer, GNSS and TFT display, IP65 protection, compatible with Heltec F&T, Meshtastic and MeshCore.
$39.90
ESP32-S3 +GPS+LoRa Node, Meshtastic, MeshCore and LoRaWAN Compatible
$30.90Mesh Node T114 is a Power Consumption development board based on the nRF52840 and SX1262, supporting LoRa and Bluetooth 5.0. which integrates various power interfaces (5V USB, lithium battery, and solar panel), an optional 1.14-inch TFT display, and a GPS module as accessories, and features powerful wireless long-distance communication capabilities, scalability, and a low-power design.
With Heltec nRF52 development environment and libraries. You can use it for LoRa/LoRaWAN development work, and also use it to run some open source projects, such as Meshtastic and Meshcore.


| Parameters | Description |
|---|---|
| MCU | nRF52840 |
| LoRa Node Chip | SX1262 |
| Frequency | 470 ~ 510MHz; 863 ~ 870MHz; 902 ~ 928MHZ. |
| Max. TX Power | 21±1dBm |
| Max. Receiving sensitivity | -135dBm@SF12 BW=125KHz |
| Bluetooth | Bluetooth LE: Bluetooth 5, Bluetooth mesh |
| Hardware Resource | USB 2.0, 4 * SPI, 2 * TWI, 2 * UART, 4 * PWM, QSPI, I2S, PDM, QDEC Etc. |
| Memory | 1M Flash · 256KB SRAM |
| Interface | Type-C USB · 2*1.25 lithium battery connector · 2 * 1.25 solar panel connector · LoRa ANT (IPEX1.0) · 8 * 1.25 GPS module connector · 2 * 13 * 2.54 Header Pin |
| Battery | 3~4.2V battery power supply and charge. |
| Operating Temperature | -20 ~ 70 ℃ |
| Dimensions | 50.80*22.86mm |
| Electrical characteristics | Deep Sleep: ~11uA · Tracker mode sleep: ~22uA · GPS OFF, TFT OFF: ~9mA · GPS OFF, TFT ON: ~20mA · GPS ON, TFT ON: ~51mA |
| Display | onboard 1.14 inch TFT-LCD display |


The default packing list without selecting any accessories is as follows:
| Item | Quantity |
|---|---|
| Mesh Node T114 | x1 |
| LoRa Antenna | x1 |
| SH1.25×2 Battery Connector | x2 |
| 2.54 *13 Header Pin | x2 |
| L76K GNSS (Available when GPS selected) | x1 |
| Protect Shell and Transfer LoRa antenna (Available when Shell selected) | x1 |
The 2.4GHz antenna is a multilayer ceramic antenna for BlueTooth communications, it can’t be replaced.
In addition to Meshtastic support, we have also developed a complete LoRaWAN protocol in the nRF52 Arduino framework.
You can find this type of socket by search “SH1.25 x 2”.
The maximum capacity of the shell for carrying batteries is 42 * 28 * 11mm, and the default 3.7V lithium battery size is 40 * 25 * 10mm
Just download the screenless version firmware and enter the 123456 password.
5V~6.5V, it is recommended to connect solar panels with a voltage of around 5V.
Not time ago, customer reports that some of the Mesh Node T114 works as a Meshtastic device and tries to send long strings (>50 chars) ONLY in Long-Fast mode (SF11, 250K BW), sometimes sending messages may fail.
https://github.com/meshtastic/firmware/issues/4723#issuecomment-2369336696
https://github.com/meshtastic/firmware/issues/4723#issuecomment-2404889735
With our detailed and long time testing, there is NO issue with long packet transmission in versions 433MHz and 470MHz, so they are not included in the compensation list.
But in response to users’ demand for the 433 and 470 hardware V2 versions, our engineers are debugging the corresponding hardware. It will be released soon.
Customer reviews for this product will appear here when available.
Markdown is supported. Switch between editing and previewing your message.

QUECTEL L76K GNSS module with ceramic antenna
$8.00
SMA antenna and its corresponding IPEX-SMA adapter cable
$0.90
863~870 MHz, 902~928MHz SMA antenna
$3.90
IPEX (V1) - SMA converter cable, RF1.13
$0.90