USB Type C
The power supply, firmware download, and debugging interfaces adopt a more universal USB Type C interface, making development work more convenient.
ESP32S3 + SX1262 LoRa Node, 0.96 inch OLED display, Meshtastic, MeshCore, Mesh networking and LoRaWAN Compatible
WiFi LoRa 32 V3, also called Heltec V3, durable IoT maker kit powered by the ESP32S3 MCU and SX1262 LoRa Node chips. Integrated three wireless communication ways —LoRa、BLE、and Wi-Fi, along with an on-board OLED display, it presents a robust, all-in-one solution.
Its superior RF design and stable, minimal system design ensure the product is ready-to-use “out of the box,” and support for development methods like Arduino, Platform IO, ESP-IDF, and MicroPython make it beginner-friendly.
It is now widely used in well-known long-range wireless open-source projects such as Meshtastic and Meshcore, serving applications in smart cities, smart farms, industrial control, and security systems.

Emergency Communication System, TFT display, GNSS, LoRa Meshtastic, MeshCore Compatible
$99.00
ESP32S3R8 + SX1262 LoRa Node, Meshtastic, MeshCore and LoRaWAN Compatible
$21.90
ESP32S3R8 + SX1262 LoRa Node, Meshtastic, MeshCore and LoRaWAN Compatible
$17.90
nRF52840 + SX1262 LoRa Node, Meshtastic, MeshCore and LoRaWAN Compatible
$17.90
nRF52840 +GPS+LoRa Node, Meshtastic, MeshCore and LoRaWAN Compatible
$33.90Current product
WiFi LoRa 32 (V3)
WiFi LoRa 32 V3, also called Heltec V3, durable IoT maker kit powered by the ESP32S3 MCU and SX1262 LoRa Node chips. Integrated three wireless communication ways —LoRa、BLE、and Wi-Fi, along with an on-board OLED display, it presents a robust, all-in-one solution.
Its superior RF design and stable, minimal system design ensure the product is ready-to-use “out of the box,” and support for development methods like Arduino, Platform IO, ESP-IDF, and MicroPython make it beginner-friendly.
It is now widely used in well-known long-range wireless open-source projects such as Meshtastic and Meshcore, serving applications in smart cities, smart farms, industrial control, and security systems.

| Parameters | Description |
|---|---|
| Master Chip | ESP32-S3FN8 (Xtensa®32-bit lx7 dual core processor) |
| LoRa Node Chip | SX1262 |
| USB to Serial Chip | CP2102 |
| Frequency | 433 ~ 510MHz, 863 ~ 928MHz |
| Max. TX Power | 21±1dBm |
| Max. Receiving sensitivity | -134dBm@SF12 BW=125KHz |
| Wi-Fi | 802.11 b/g/n, up to 150Mbps |
| Bluetooth | Bluetooth 5, Bluetooth mesh |
| Hardware Resource | 7 * ADC1 + 2 * ADC2; · 7 * Touch; · 3 * UART; · 2 * I2C; · 2 * SPI; etc. |
| Memory | 384KB ROM; · 512KB SRAM; · 16KB RTC SRAM; · 8MB SiP Flash |
| Interface | Type-C USB; · 2*1.25 lithium battery interface; LoRa ANT(IPEX1.0); · 2 * 18 * 2.54 Header Pin |
| Battery | 3.7V lithium battery power supply and charging |
| Operating Temperature | -20 ~ 70 ℃ |
| Dimensions | 50.2 * 25.5* 10.2 mm |

The default packing list without selecting any accessories is as follows:
| Item | Quantity |
|---|---|
| WiFi LoRa 32 (V3) | x1 |
| LoRa Antenna | x1 |
| SH1.25×2 Battery Connector | x1 |
| 2.54*18 Header Pin | x2 |
The 2.4GHz antenna is a spring antenna, and there is no additional interface on the board for 2.4GHz wireless signals.
No, the WiFi LoRa 32 don’t have an external PSRAM, if your application need use Bluetooth and Wi-Fi at the same time, you can look into this product: Heltec Wireless Bridge.
We strongly recommend using Arduino. We have complete technical support and provide complete LoRaWAN code for ESP32 Arduino framework.
We strongly recommend using Arduino. We have complete technical support and provide complete LoRaWAN code for ESP32 Arduino framework.
You can find this type of socket by search “SH1.25 x 2”.
Of course, you can contact our sales staff and provide your ideas.
No, the MCU is different.
It’s caused by the meshtastic setting. Changing the default screen to SSD1306 can solve the problem.
The specific steps are as follows:
“Radio configuration”→”Display”→”Override OLED auto-detect”→”SSD1306”
According to the situation we have collected so far, the most likely to cause a constant reset problem may have three reasons:
– Insufficient Power Supply Current The board may reboot intermittently if the connected USB power source cannot deliver adequate current. Ensure your power supply provides at least 600 mA of stable 5V DC output.
– Wi-Fi spring Antenna Damaged or Compressed by Enclosure Recommend removing the enclosure and testing the board in open air. If using a case, verify that no part of the plastic or metal structure presses against or covers the antenna area (typically near the ESP32 module edge).
– Incorrect or Incompatible Firmware Flashed to LoRa 32 V3 Please flash firmware compiled or verified for LoRa 32 V3. Double-check board selection in your IDE. If unsure, reflash the official factory demo or the latest stable firmware from the manufacturer’s github repository.
It does not indicate device damage. Please disregard this phenomenon. The LORA ERROR occurs because it is running the factory default LORA testing program and cannot find another device running the same program.
The display is soldered on, so even if you get the screen, it will be difficult to deal with. You can set the device PIN code to a fixed one through the serial port tool page..
Customer reviews for this product will appear here when available.
Markdown is supported. Switch between editing and previewing your message.

Emergency Communication System, TFT display, GNSS, LoRa Meshtastic, MeshCore Compatible
$99.00
ESP32S3R8 + SX1262 LoRa Node, Meshtastic, MeshCore and LoRaWAN Compatible
$21.90
ESP32S3R8 + SX1262 LoRa Node, Meshtastic, MeshCore and LoRaWAN Compatible
$17.90
nRF52840 + SX1262 LoRa Node, Meshtastic, MeshCore and LoRaWAN Compatible
$17.90
nRF52840 +GPS+LoRa Node, Meshtastic, MeshCore and LoRaWAN Compatible
$33.90WiFi LoRa 32 V3, also called Heltec V3, durable IoT maker kit powered by the ESP32S3 MCU and SX1262 LoRa Node chips. Integrated three wireless communication ways —LoRa、BLE、and Wi-Fi, along with an on-board OLED display, it presents a robust, all-in-one solution.
Its superior RF design and stable, minimal system design ensure the product is ready-to-use “out of the box,” and support for development methods like Arduino, Platform IO, ESP-IDF, and MicroPython make it beginner-friendly.
It is now widely used in well-known long-range wireless open-source projects such as Meshtastic and Meshcore, serving applications in smart cities, smart farms, industrial control, and security systems.

| Parameters | Description |
|---|---|
| Master Chip | ESP32-S3FN8 (Xtensa®32-bit lx7 dual core processor) |
| LoRa Node Chip | SX1262 |
| USB to Serial Chip | CP2102 |
| Frequency | 433 ~ 510MHz, 863 ~ 928MHz |
| Max. TX Power | 21±1dBm |
| Max. Receiving sensitivity | -134dBm@SF12 BW=125KHz |
| Wi-Fi | 802.11 b/g/n, up to 150Mbps |
| Bluetooth | Bluetooth 5, Bluetooth mesh |
| Hardware Resource | 7 * ADC1 + 2 * ADC2; · 7 * Touch; · 3 * UART; · 2 * I2C; · 2 * SPI; etc. |
| Memory | 384KB ROM; · 512KB SRAM; · 16KB RTC SRAM; · 8MB SiP Flash |
| Interface | Type-C USB; · 2*1.25 lithium battery interface; LoRa ANT(IPEX1.0); · 2 * 18 * 2.54 Header Pin |
| Battery | 3.7V lithium battery power supply and charging |
| Operating Temperature | -20 ~ 70 ℃ |
| Dimensions | 50.2 * 25.5* 10.2 mm |

The default packing list without selecting any accessories is as follows:
| Item | Quantity |
|---|---|
| WiFi LoRa 32 (V3) | x1 |
| LoRa Antenna | x1 |
| SH1.25×2 Battery Connector | x1 |
| 2.54*18 Header Pin | x2 |
The 2.4GHz antenna is a spring antenna, and there is no additional interface on the board for 2.4GHz wireless signals.
No, the WiFi LoRa 32 don’t have an external PSRAM, if your application need use Bluetooth and Wi-Fi at the same time, you can look into this product: Heltec Wireless Bridge.
We strongly recommend using Arduino. We have complete technical support and provide complete LoRaWAN code for ESP32 Arduino framework.
We strongly recommend using Arduino. We have complete technical support and provide complete LoRaWAN code for ESP32 Arduino framework.
You can find this type of socket by search “SH1.25 x 2”.
Of course, you can contact our sales staff and provide your ideas.
No, the MCU is different.
It’s caused by the meshtastic setting. Changing the default screen to SSD1306 can solve the problem.
The specific steps are as follows:
“Radio configuration”→”Display”→”Override OLED auto-detect”→”SSD1306”
According to the situation we have collected so far, the most likely to cause a constant reset problem may have three reasons:
– Insufficient Power Supply Current The board may reboot intermittently if the connected USB power source cannot deliver adequate current. Ensure your power supply provides at least 600 mA of stable 5V DC output.
– Wi-Fi spring Antenna Damaged or Compressed by Enclosure Recommend removing the enclosure and testing the board in open air. If using a case, verify that no part of the plastic or metal structure presses against or covers the antenna area (typically near the ESP32 module edge).
– Incorrect or Incompatible Firmware Flashed to LoRa 32 V3 Please flash firmware compiled or verified for LoRa 32 V3. Double-check board selection in your IDE. If unsure, reflash the official factory demo or the latest stable firmware from the manufacturer’s github repository.
It does not indicate device damage. Please disregard this phenomenon. The LORA ERROR occurs because it is running the factory default LORA testing program and cannot find another device running the same program.
The display is soldered on, so even if you get the screen, it will be difficult to deal with. You can set the device PIN code to a fixed one through the serial port tool page..
Customer reviews for this product will appear here when available.
Markdown is supported. Switch between editing and previewing your message.

QUECTEL L76K GNSS module with ceramic antenna
$8.00
863~870 MHz, 902~928MHz SMA antenna
$3.90
SMA antenna and its corresponding IPEX-SMA adapter cable
$0.90
Waterproof Enclosure for Outdoor Meshtastic/MeshCore
$45.20