HELTEC image
HomeProductsWireless Bridge

Wireless Bridge

ESP32 + SX1262 LoRa Node device, 8MB PSRAM and 8MB FLASH, LoRa bridge device

BoardLoRaWi-FiBLE/BT
01 / 03
$28.90

WiFi and Bluetooth have been widely used in various scenarios, especially in terms of communication speed, which have obvious advantages. Almost all mobile phones now integrate WiFi and Bluetooth functions, but the communication distance is their shortcoming. Is there any hardware that can combine the long-distance advantages of LoRa with the advantages of WiFi/Bluetooth?

Wireless Bridge is such a product. Based on ESP32 and SX1276 chips, onboard 8M Byte SDRAM and 8M Byte FLASH, WiFi and Bluetooth can work at the same time. It is a bridge that converts “WiFi/Bluetooth – LoRa” signals to each other.

Info The wireless bridge is a development Board that requires downloading the corresponding code to run.

You May Also Like

Compare Difference

Current product

Wireless Bridge

Summary

Note: This wireless bridge is a development board; it requires further development to function properly.

WiFi and Bluetooth are widely used in various scenarios, especially for communication speed, which offers clear advantages. Almost all mobile phones now integrate WiFi and Bluetooth functions, but their communication distance is a shortcoming. Is there any hardware that can combine the long-distance advantages of LoRa with the advantages of WiFi/Bluetooth?

Wireless Bridge is such a product. Based on ESP32 and SX1276 chips, onboard 8M Byte SDRAM and 8M Byte FLASH, WiFi and Bluetooth can work at the same time. It is a bridge that converts “WiFi/Bluetooth – LoRa” signals to each other.

Main Features

  • CE Certificate;
  • Microprocessor: ESP32 (dual-core 32-bit MCU + ULP core), with LoRa node chip SX1276;
  • 8M Byte SDRAM and 8M Byte FLASH, these features will allow WiFi and BlueTooth to work at the same time.
  • +5V DC Micro USB power input, with a complete voltage regulator, ESD protection, short circuit protection, RF shielding, and other protection measures;
  • SMA socket for LoRa, WiFi/BlueTooth antenna;
  • Integrated CP2102 USB to serial port chip, convenient for program downloading, debugging information printing.
  • Support the Arduino development environment;

Specifications

ParametersDescription
Master ChipESP32-D0WDQ6
LoRa ChipsetSX1276
USB to Serial ChipCP2102
Frequency470 ~ 510MHz, 863 ~ 928MHz
Max. TX Power18d B ± 1d B
Max. Receiving Sensitivity-135dBm
Wi-Fi802.11 b/g/n, up to 150Mbps
BluetoothBluetooth V4.2 BR/EDR and Bluetooth LE sepcification
Memory8MB(64M-bits) SPI FLASH, · internal 520KB SRAM, · 8MB(64M-bits) PSRAM
Battery3.7V lithium battery power supply and charging
Operating temperature-20 ~ 70 ℃
Dimensions66(+10) x 30 x 15 mm
InterfaceMicro USB*1; · LoRa Antenna interface(SMA); · 2.4G Antenna interface(SMA)
Low PowerDeep sleep 800μA

High light

Micro-USB

Integrated CP2102 USB to serial port chip, convenient for program.

1 / 2

Docs & Resource

Packing list

The default packing list without selecting any accessories is as follows:

ItemQuantity
Wireless Stickx1
LoRa Antennax1
Wi-Fi Antennax1
USB cablex1

Contact

Markdown is supported. Switch between editing and previewing your message.

Message0/5000
From
$28.90