HELTEC image
HomeProductsVision Master E213

Vision Master E213

ESP32S3 + SX1262 2.13 inch E-Ink display with LoRa module optional, Mesh networking and LoRaWAN Compatible

BoardLoRaWi-FiBLE/BT
01 / 05
$18.90 — $20.90

Vision Master E213 (HT-VME213) is an E-Ink development kit with multiple wireless drive methods. Collaborate with the sample programs and development tools we provide, users can operate the display via Bluetooth, Wi-Fi and LoRa.

This board is equipped with a default 2.13-inch black and white E-Ink display screen, continuous display for 180 days after power outage. It is compatible with Arduino, PlatformIO, Micpython and other development frameworks, can be used to develop applications such as electronic tags and identity tags, it is also possible to run open source projects like Meshtastic.

You May Also Like

Compare Difference

Current product

Vision Master E213

Summary

Vision Master E213 is an E-Ink development kit with multiple wireless drive methods. Collaborate with the sample programs and development tools we provide, users can operate the display via Bluetooth, Wi-Fi and LoRa.

This board is equipped with a default 2.13-inch black and white E-Ink display screen, continuous display for 180 days after power outage. It is compatible with Arduino, PlatformIO, Micpython and other development frameworks, can be used to develop applications such as electronic tags and identity tags, it is also possible to run open source projects like Meshtastic.

Main Features

  • ESP32-S3R8 MCU, support Wi-Fi and BLE.
  • LoRa module is optional, compatible with Meshtastic.
  • Low power consumption, 20uA in deep sleep, continuous display for 180 days after power outage.
  • Onboard 1.25-2P battery interface, integrated lithium battery management system (charge and discharge management, overcharge protection, battery power detection, USB / battery power automatic switching).
  • Onboard 2.13 inch 250 x 122 pixels display, support for partial refresh.
  • Storage condition: -25 ~ 70℃, ≤45%RH.
  • Optimal operating condition:0~50℃, 55±10%RH.
  • 2*SH2.0-4P sensor interface is perfectly compatible with QuickLink series sensors.
  • Compatible with Arduino, we provide development frameworks and libraries.

Specifications

ParametersDescription
Master ChipESP32-S3R8
LoRa Node ChipSX1262
Frequency433~510MHz, 863 ~ 928MHz
Max. TX Power21±1dBm
Max. Receiving sensitivity-136dBm@SF12 BW=125KHz
Wi-Fi802.11 b/g/n, up to 150Mbps
BluetoothBluetooth 5 (LE)
Hardware Resource6 * ADC_1, 1 * ADC_2, 6*Touch, 8M * PSRAM, 3 * UART; 2 * I2C; 2 * SPI. Etc
Memory384KB ROM; · 512KB SRAM; · 16KB RTC SRAM; 16MB SiP Flash
InterfaceType-C USB; 2 * 1.25 lithium battery interface; LoRa ANT(IPEX1.0); Wi-Fi ANT(IPEX1.0); 2 * 18 * 2.54 Header Pin; 2 * SH2.0-4P sensor interface
Battery3.7V lithium battery power supply and charging
Operating Temperature-20 ~ 70 ℃
Dimensions66.75 * 30.41 * 10mm
Display2.13 Inch Black and White E-Ink Display Screen

Pin Map

Demension

Highlight

Highly extensible

Vision Master E213 has a rich set of pins and hardware resources, which will allow you to expand widely. The SH2.0-4P interface can be directly connected to the QuickLink series sensors.

1 / 3

Packing list

The default packing list without selecting any accessories is as follows:

ItemQuantity
HT-VME213x1
LoRa Antenna (Available when LoRa selected)x1
1.25-2P Battery Connectorx1
2.54*13 Header Pinx2

Contact

Markdown is supported. Switch between editing and previewing your message.

Message0/5000
From
$18.90 — $20.90