Highly extensible
Vision Master T190 has a rich set of pins and hardware resources, which will allow you to expand widely. The SH1.0-4P interface can be directly connected to the QuickLink series sensors.
ESP32S3 + SX1262 LoRa Node, Meshtastic and LoRaWAN Compatible
Note Please upgrade to the latest firmware for a better experience: https://github.com/NMminer1024/NMMiner
Vision Master T190 (HT-VMT190) is a development kit with ESP32-S3 and LoRa Module (optional). The onboard 1.9-inch TFT-LCD display contains 170 (RGB)X320 dots and can display up to 262k colors.
Working with the sample programs and development tools we provide, users can operate the display via Bluetooth, Wi-Fi and LoRa. It also supports daily entry-level programming, and runs open source projects like Meshtastic.

ESP32S3 + SX1262 2.13 inch E-Ink display with LoRa module optional, Mesh networking and LoRaWAN Compatible
$18.90
ESP32S3 + SX1262 2.9 inch E-Ink display with LoRa module optional, Mesh networking and LoRaWAN Compatible
$19.90
nRF52840,BLE, LoRa, Meshtastic, MeshCore, LoRaWAN
$15.90
RadioCore ESP32-C6 LoRa Wi-Fi BLE, Meshtastic, MeshCore, LoRaWAN
$8.90
RadioCore ESP32-S3 LoRa Wi-Fi HaLow, Meshtastic, MeshCore, LoRaWAN
$9.90
ESP32S3R8 + SX1262 LoRa Node, Meshtastic, MeshCore and LoRaWAN Compatible
$21.90
ESP32S3R8 + SX1262 LoRa Node, Meshtastic, MeshCore and LoRaWAN Compatible
$17.90Current product
Vision Master T190
Vision Master T190 (HT-VMT190) is a development kit with ESP32-S3 and LoRa Module (optional). The onboard 1.9-inch TFT-LCD display contains 170 (RGB)X320 dots and can display up to 262k colors.
Working with the sample programs and development tools we provide, users can operate the display via Bluetooth, Wi-Fi and LoRa. It also supports daily entry-level programming, and runs open source projects like Meshtastic.

| Parameters | Description |
|---|---|
| Master Chip | ESP32-S3R8 |
| LoRa Node Chip | SX1262 |
| Frequency | 470 ~ 510MHz, · 863 ~ 928MHz |
| Max. TX Power | 21±1dBm |
| Max. Receiving sensitivity | -136dBm@SF12 BW=125KHz |
| Wi-Fi | 802.11 b/g/n, up to 150Mbps |
| Bluetooth | Bluetooth LE: Bluetooth 5, Bluetooth mesh |
| Hardware Resource | 7 x ADC_1, 6 x ADC_2, 11 x Touch, 3 x UART; 2 x I2C; 2 x SPI. Etc |
| Memory | 384KB ROM; 512KB SRAM; 16KB RTC SRAM; 8M*PSRAM;16MB SiP Flash |
| Interface | Type-C USB; 2 x 1.25 lithium battery interface; LoRa ANT(IPEX1.0); Wi-Fi ANT(IPEX1.0); ·2 x 12 x 2.54 Header Pin; 1.25-4P sensor interface. |
| Battery | 3.3~4.2V lithium battery power supply and charge. |
| Operating Temperature | -20 ~ 70 ℃ |
| Dimensions | 60 * 25.4 * 10.19mm |
| Display | Onboard 1.9 Inch TFT-LCD Display |


The default packing list without selecting any accessories is as follows:
| Item | Quantity |
|---|---|
| HT-VMT190 | x1 |
| LoRa Antenna (Available when LoRa selected) | x1 |
| 1.25-2P Battery Connector | x1 |
| Sensor connection wire | x1 |
| 2.54 *13 Header Pin | x2 |
The default configuration of T190 board is PCB antenna, and the 2.4GHz antenna is a spring antenna. There is an additional interface on the board for 2.4GHz wireless signals. When connecting an external antenna, the resistor needs to be rotated 90 degrees to the left.
We strongly recommend using Arduino. We have complete technical support and provide complete LoRaWAN code for ESP32 Arduino framework.
You can find this type of socket by search “SH1.25 x 2”.
This is a 10cm sensor adapter cable with specifications ranging from SH 1.0-4P to PH 2.0-4P. It is used to connect the development board and sensors. The sh 1.0-4P port is used to connect to the interface of the development board, while the ph 2.0-4P port is used to connect to the sensor interface. If you need this product separately, you can purchase it through this link. Specification of board sensor connection port
Press and hold the Boot key, press RST once, and then release the Boot key. Alternatively, keep holding down the boot button and then connect the USB. Among them 21 button can be customized by user.
Customer reviews for this product will appear here when available.
Markdown is supported. Switch between editing and previewing your message.

ESP32S3 + SX1262 2.13 inch E-Ink display with LoRa module optional, Mesh networking and LoRaWAN Compatible
$18.90
ESP32S3 + SX1262 2.9 inch E-Ink display with LoRa module optional, Mesh networking and LoRaWAN Compatible
$19.90
nRF52840,BLE, LoRa, Meshtastic, MeshCore, LoRaWAN
$15.90
RadioCore ESP32-C6 LoRa Wi-Fi BLE, Meshtastic, MeshCore, LoRaWAN
$8.90
RadioCore ESP32-S3 LoRa Wi-Fi HaLow, Meshtastic, MeshCore, LoRaWAN
$9.90
ESP32S3R8 + SX1262 LoRa Node, Meshtastic, MeshCore and LoRaWAN Compatible
$21.90
ESP32S3R8 + SX1262 LoRa Node, Meshtastic, MeshCore and LoRaWAN Compatible
$17.90Vision Master T190 (HT-VMT190) is a development kit with ESP32-S3 and LoRa Module (optional). The onboard 1.9-inch TFT-LCD display contains 170 (RGB)X320 dots and can display up to 262k colors.
Working with the sample programs and development tools we provide, users can operate the display via Bluetooth, Wi-Fi and LoRa. It also supports daily entry-level programming, and runs open source projects like Meshtastic.

| Parameters | Description |
|---|---|
| Master Chip | ESP32-S3R8 |
| LoRa Node Chip | SX1262 |
| Frequency | 470 ~ 510MHz, · 863 ~ 928MHz |
| Max. TX Power | 21±1dBm |
| Max. Receiving sensitivity | -136dBm@SF12 BW=125KHz |
| Wi-Fi | 802.11 b/g/n, up to 150Mbps |
| Bluetooth | Bluetooth LE: Bluetooth 5, Bluetooth mesh |
| Hardware Resource | 7 x ADC_1, 6 x ADC_2, 11 x Touch, 3 x UART; 2 x I2C; 2 x SPI. Etc |
| Memory | 384KB ROM; 512KB SRAM; 16KB RTC SRAM; 8M*PSRAM;16MB SiP Flash |
| Interface | Type-C USB; 2 x 1.25 lithium battery interface; LoRa ANT(IPEX1.0); Wi-Fi ANT(IPEX1.0); ·2 x 12 x 2.54 Header Pin; 1.25-4P sensor interface. |
| Battery | 3.3~4.2V lithium battery power supply and charge. |
| Operating Temperature | -20 ~ 70 ℃ |
| Dimensions | 60 * 25.4 * 10.19mm |
| Display | Onboard 1.9 Inch TFT-LCD Display |


The default packing list without selecting any accessories is as follows:
| Item | Quantity |
|---|---|
| HT-VMT190 | x1 |
| LoRa Antenna (Available when LoRa selected) | x1 |
| 1.25-2P Battery Connector | x1 |
| Sensor connection wire | x1 |
| 2.54 *13 Header Pin | x2 |
The default configuration of T190 board is PCB antenna, and the 2.4GHz antenna is a spring antenna. There is an additional interface on the board for 2.4GHz wireless signals. When connecting an external antenna, the resistor needs to be rotated 90 degrees to the left.
We strongly recommend using Arduino. We have complete technical support and provide complete LoRaWAN code for ESP32 Arduino framework.
You can find this type of socket by search “SH1.25 x 2”.
This is a 10cm sensor adapter cable with specifications ranging from SH 1.0-4P to PH 2.0-4P. It is used to connect the development board and sensors. The sh 1.0-4P port is used to connect to the interface of the development board, while the ph 2.0-4P port is used to connect to the sensor interface. If you need this product separately, you can purchase it through this link. Specification of board sensor connection port
Press and hold the Boot key, press RST once, and then release the Boot key. Alternatively, keep holding down the boot button and then connect the USB. Among them 21 button can be customized by user.
Customer reviews for this product will appear here when available.
Markdown is supported. Switch between editing and previewing your message.

MTK7628 Processor and SX1302 + SX1255 LoRaWAN gateway, Ethernet, Wi-Fi
$89.00
RK3566 Quad-core Cortex-A55 64-bit 1.8GHz CPU, Linux edge computing, SX1302 + SX1250 LoRaWAN Gateway
$229.00