Powerful communication capability
- based on the nRF52840 and SX1262.
- supports LoRa and Bluetooth.
nRF52840 + SX1262Module, Meshtastic, MeshCore Compatible
Mesh Node 5262M is a module based on the nRF52840 and SX1262, supporting both Bluetooth and LoRa communication modes. It offers a rich set of pins and interfaces, featuring a 1.27mm pitch stamp hole design, making it compact and easy to integrate into your PCB. Having powerful long-distance communication capabilities, scalability, and low power design, which make it excellent in a wide range of application scenarios such as smart cities, agricultural monitoring, logistics tracking, etc. It can be programmed via the Arduino IDE, PlatformIO, or MicroPython. You can directly use it for LoRa/LoRaWAN development with Heltec nRF52 framework and libraries, as well as to run some open source projects like Meshtastic.

ESP32S3R8 + SX1262 LoRa Node, Meshtastic, MeshCore and LoRaWAN Compatible
$21.90
ESP32S3R8 + SX1262 LoRa Node, Meshtastic, MeshCore and LoRaWAN Compatible
$17.90
nRF52840 + SX1262 LoRa Node, Meshtastic, MeshCore and LoRaWAN Compatible
$17.90
nRF52840 +GPS+LoRa Node, Meshtastic, MeshCore and LoRaWAN Compatible
$33.90
ESP32-S3 +GPS+LoRa Node, Meshtastic, MeshCore and LoRaWAN Compatible
$30.90Current product
Mesh Node 5262M LoRa Module
Mesh Node 5262M is a module based on the nRF52840 and SX1262, supporting both Bluetooth and LoRa communication modes. It offers a rich set of pins and interfaces, featuring a 1.27mm pitch stamp hole design, making it compact and easy to integrate into your PCB. Having powerful long-distance communication capabilities, scalability, and low power design, which make it excellent in a wide range of application scenarios such as smart cities, agricultural monitoring, logistics tracking, etc. It can be programmed via the Arduino IDE, PlatformIO, or MicroPython. You can directly use it for LoRa/LoRaWAN development with Heltec nRF52 framework and libraries, as well as to run some open source projects like Meshtastic.

| Parameters | Description |
|---|---|
| MCU | nRF52840 |
| LoRa Chip | SX1262 |
| Memory | 1M Flash; 256kB SRAM |
| Bluetooth | Bluetooth 5, Bluetooth mesh, BLE. |
| Operating temperature | -40~85℃ |
| Operating Humidity | 90%(No condensing) |
| Power Supply | 3.3V |
| Hardware Resource | 3 * SPI, 2 * I2C, 2 * UART, 4 * PWM, QSPI, I2S, PDM, QDEC, Etc |
| Interface | 2 * ANT (IPEX1.0)), 54*1.27 stamp hole pin headers |
| Dimensions | 30 * 20 * 3.2 mm |


The default packing list without selecting any accessories is as follows:
| Item | Quantity |
|---|---|
| HT-N5262M | x1 |
About SPI, I2C, UART, QSPI, I2S, PDM, QDEC: Each IO pin is preconfigured with IO_MUX functionality, which means you can use any GPIO as peripheral pins. You just need to define these pins in your SDK. However, it’s important to note that once a pin is used, it may affect other functions associated with that pin.
In addition to Meshtastic support, we have also developed a complete LoRaWAN protocol in the nRF52 Arduino framework.
These pins can also be used for other functions like I2C, SPI, etc., but need to be properly configured when used for PWM output:
GPIO 0 – GPIO 31: Most of these pins can be used as PWM outputs, but the specific pins that support PWM depend on the timer and channel configuration. Most of the pins can be configured as regular GPIOs and support timer output.
For certain PWM frequency and duty cycle requirements, the software can typically control which timer channel is mapped to which GPIO pin.
Customer reviews for this product will appear here when available.
Markdown is supported. Switch between editing and previewing your message.

ESP32S3R8 + SX1262 LoRa Node, Meshtastic, MeshCore and LoRaWAN Compatible
$21.90
ESP32S3R8 + SX1262 LoRa Node, Meshtastic, MeshCore and LoRaWAN Compatible
$17.90
nRF52840 + SX1262 LoRa Node, Meshtastic, MeshCore and LoRaWAN Compatible
$17.90
nRF52840 +GPS+LoRa Node, Meshtastic, MeshCore and LoRaWAN Compatible
$33.90
ESP32-S3 +GPS+LoRa Node, Meshtastic, MeshCore and LoRaWAN Compatible
$30.90Mesh Node 5262M is a module based on the nRF52840 and SX1262, supporting both Bluetooth and LoRa communication modes. It offers a rich set of pins and interfaces, featuring a 1.27mm pitch stamp hole design, making it compact and easy to integrate into your PCB. Having powerful long-distance communication capabilities, scalability, and low power design, which make it excellent in a wide range of application scenarios such as smart cities, agricultural monitoring, logistics tracking, etc. It can be programmed via the Arduino IDE, PlatformIO, or MicroPython. You can directly use it for LoRa/LoRaWAN development with Heltec nRF52 framework and libraries, as well as to run some open source projects like Meshtastic.

| Parameters | Description |
|---|---|
| MCU | nRF52840 |
| LoRa Chip | SX1262 |
| Memory | 1M Flash; 256kB SRAM |
| Bluetooth | Bluetooth 5, Bluetooth mesh, BLE. |
| Operating temperature | -40~85℃ |
| Operating Humidity | 90%(No condensing) |
| Power Supply | 3.3V |
| Hardware Resource | 3 * SPI, 2 * I2C, 2 * UART, 4 * PWM, QSPI, I2S, PDM, QDEC, Etc |
| Interface | 2 * ANT (IPEX1.0)), 54*1.27 stamp hole pin headers |
| Dimensions | 30 * 20 * 3.2 mm |


The default packing list without selecting any accessories is as follows:
| Item | Quantity |
|---|---|
| HT-N5262M | x1 |
About SPI, I2C, UART, QSPI, I2S, PDM, QDEC: Each IO pin is preconfigured with IO_MUX functionality, which means you can use any GPIO as peripheral pins. You just need to define these pins in your SDK. However, it’s important to note that once a pin is used, it may affect other functions associated with that pin.
In addition to Meshtastic support, we have also developed a complete LoRaWAN protocol in the nRF52 Arduino framework.
These pins can also be used for other functions like I2C, SPI, etc., but need to be properly configured when used for PWM output:
GPIO 0 – GPIO 31: Most of these pins can be used as PWM outputs, but the specific pins that support PWM depend on the timer and channel configuration. Most of the pins can be configured as regular GPIOs and support timer output.
For certain PWM frequency and duty cycle requirements, the software can typically control which timer channel is mapped to which GPIO pin.
Customer reviews for this product will appear here when available.
Markdown is supported. Switch between editing and previewing your message.

IPEX (V1) - SMA converter cable, RF1.13
$0.90
863~870 MHz, 902~928MHz SMA antenna
$3.90
SMA antenna and its corresponding IPEX-SMA adapter cable
$0.90
IPEX - N Type converter
$2.99
N type socket fiberglass omni antenna
$12.90