Powerhouse Combo: Solar + Battery
18V solar panel & 3×3000mAh battery for fast charging and extended endurance.
30dBm Outdoor LoRa Node
MeshTower is outdoor solar-powered node with simultaneous 30dBm LoRa transmit power, Bluetooth and GNSS communication, integrating a 10W solar panel and 3 x 2800mAh lithium batteries. Housed in an IP66-rated waterproof metal enclosure and designed for -20°C to 60°C environments, it thrives in harsh conditions. Offering pole/wall-mount flexibility, it’s ideal for remote monitoring and off-grid communication—delivering solar endurance and industrial resilience.

RadioCore ESP32-S3 LoRa Wi-Fi HaLow, Meshtastic, MeshCore, LoRaWAN
$9.90
ESP32S3R8 + SX1262 LoRa Node, Meshtastic, MeshCore and LoRaWAN Compatible
$21.90
Emergency Communication System, TFT display, GNSS, LoRa Meshtastic, MeshCore Compatible
$99.00
ESP32S3R8 + SX1262 LoRa Node, Meshtastic, MeshCore and LoRaWAN Compatible
$17.90
nRF52840 + SX1262 LoRa Node, Meshtastic, MeshCore and LoRaWAN Compatible
$17.90
nRF52840 +GPS+LoRa Node, Meshtastic, MeshCore and LoRaWAN Compatible
$33.90Current product
MeshTower V2
MeshTower is outdoor solar-powered node with simultaneous 30dBm LoRa transmit power, Bluetooth and GNSS communication, integrating a 10W solar panel and 3 x 2800mAh lithium batteries. Housed in an IP66-rated waterproof metal enclosure and designed for -20°C to 60°C environments, it thrives in harsh conditions. Offering pole/wall-mount flexibility, it’s ideal for remote monitoring and off-grid communication—delivering solar endurance and industrial resilience.
| General Parameters | Description |
|---|---|
| MCU | nRF52840 |
| LoRa Chip | SX1262 |
| Solar Panel | 18V/10W |
| Battery | 3*2800mAh |
| DC Input Voltage | 18~24V |
| USB-C Input | PD3.0 20V |
| Battery Charging Current | ≤1.5A |
| Operating Temperature | -20°C to 60°C |
| Protection Rating | IP66 |
| Housing material | Aluminum alloy |
| LoRa Transmit Power | 30 dBm |
| Dimensions | Enclosure: 125 * 125 * 52 mm ( ( not including antenna ) Panel: 320 * 230 mm |

The default packing list without selecting any accessories is as follows:
| Item | Quantity |
|---|---|
| MeshTower | x1 |
| N-interface fiberglass antenna | x1 |
| 2.4G antenna | x1 |
| GPS antenna | x1 |
| 10W solar panel with waterproof joint | x1 |
| USB-C to USB-C cable | x1 |
| Wall installation backboard | x1 |
| GPS Sensor (Available only when the GPS Sensor is selected) | x1 |
Yes, supports 18V–24V DC charging.
Via USB interface (Type-C/micro-USB as specified).
Regarding the SD‑card SPI pin assignments, please refer to our partial schematic document which covers the SD‑card circuit: https://resource.heltec.cn/download/MeshTower-V2/schematic/MeshTower_V2_Partial_Reference_Circuit.pdf The microSD slot operates in SPI mode, all related pin definitions are marked within this file.
Customer reviews for this product will appear here when available.
Markdown is supported. Switch between editing and previewing your message.

RadioCore ESP32-S3 LoRa Wi-Fi HaLow, Meshtastic, MeshCore, LoRaWAN
$9.90
ESP32S3R8 + SX1262 LoRa Node, Meshtastic, MeshCore and LoRaWAN Compatible
$21.90
Emergency Communication System, TFT display, GNSS, LoRa Meshtastic, MeshCore Compatible
$99.00
ESP32S3R8 + SX1262 LoRa Node, Meshtastic, MeshCore and LoRaWAN Compatible
$17.90
nRF52840 + SX1262 LoRa Node, Meshtastic, MeshCore and LoRaWAN Compatible
$17.90
nRF52840 +GPS+LoRa Node, Meshtastic, MeshCore and LoRaWAN Compatible
$33.90MeshTower is outdoor solar-powered node with simultaneous 30dBm LoRa transmit power, Bluetooth and GNSS communication, integrating a 10W solar panel and 3 x 2800mAh lithium batteries. Housed in an IP66-rated waterproof metal enclosure and designed for -20°C to 60°C environments, it thrives in harsh conditions. Offering pole/wall-mount flexibility, it’s ideal for remote monitoring and off-grid communication—delivering solar endurance and industrial resilience.
| General Parameters | Description |
|---|---|
| MCU | nRF52840 |
| LoRa Chip | SX1262 |
| Solar Panel | 18V/10W |
| Battery | 3*2800mAh |
| DC Input Voltage | 18~24V |
| USB-C Input | PD3.0 20V |
| Battery Charging Current | ≤1.5A |
| Operating Temperature | -20°C to 60°C |
| Protection Rating | IP66 |
| Housing material | Aluminum alloy |
| LoRa Transmit Power | 30 dBm |
| Dimensions | Enclosure: 125 * 125 * 52 mm ( ( not including antenna ) Panel: 320 * 230 mm |

The default packing list without selecting any accessories is as follows:
| Item | Quantity |
|---|---|
| MeshTower | x1 |
| N-interface fiberglass antenna | x1 |
| 2.4G antenna | x1 |
| GPS antenna | x1 |
| 10W solar panel with waterproof joint | x1 |
| USB-C to USB-C cable | x1 |
| Wall installation backboard | x1 |
| GPS Sensor (Available only when the GPS Sensor is selected) | x1 |
Yes, supports 18V–24V DC charging.
Via USB interface (Type-C/micro-USB as specified).
Regarding the SD‑card SPI pin assignments, please refer to our partial schematic document which covers the SD‑card circuit: https://resource.heltec.cn/download/MeshTower-V2/schematic/MeshTower_V2_Partial_Reference_Circuit.pdf The microSD slot operates in SPI mode, all related pin definitions are marked within this file.
Customer reviews for this product will appear here when available.
Markdown is supported. Switch between editing and previewing your message.

N type socket fiberglass omni antenna
$12.90