RC32 itself supports Meshtastic and MeshCore. However, pin conflicts will occur with sensor pins. Therefore, it is not recommended, unless you do not intend to connect any sensors.
RD01 Smart Home RadioCore Gadget
Smart home gadget based on RadioCore, sensor slot kit for RC32
RD01 is a carrier board for RC32. It integrates an 18650 battery holder, 3 B2B sensor interfaces and 3 4-pin I2C interfaces. It enables easy integration of various sensors and is ideal for a wide range of sensor applications such as Home Assistant.
You May Also Like

RD-GA01 Mesh Networking RadioCore Gadget
Mesh networking gadget based on RadioCore, nRF52840, 1.08 inch TFT display, 1800mAh battery, 9-axis IMU, GNSS, LoRa Mesh Node
$36.90
RD-GB01 Mesh Networking RadioCore Gadget
Mesh networking gadget based on RadioCore, 18350 battery, GNSS, LoRa Mesh Node
$27.90
RDC1 Pendant Mesh Networking RadioCore Gadget
Mesh networking gadget based on RadioCore, GNSS, pendant with a silicone casing, no battery, external power supply.
$20.90
MeshPocket V2 Qi2 Magnetic Charging Power Bank
Emergency Communication System, TFT display, GNSS, LoRa Meshtastic, MeshCore Compatible
$99.00
RadioCore RC32
RadioCore ESP32-S3 LoRa Wi-Fi HaLow, Meshtastic, MeshCore, LoRaWAN
$9.90Compare Difference
Current product
RD01 Smart Home RadioCore Gadget
Summary
RD01 is a carrier board for RC32. It integrates an 18650 battery holder, B2B sensor interface * 3 and 4-pin I2C interface * 3. It enables easy integration of various sensors and is ideal for a wide range of sensor applications such as Home Assistant.
Specifications
| Parameters | Description |
|---|---|
| Enclosure Material | PLA(3D-printed) |
| Battery: | 18650 Li-ion |
| Dimensions | 105×23×38.5mm |
| Interface | B2B * 3, 2.0-4P Connector *3 |
| Antenna Connector | SMA female |
| Compatible MCU | RC32 |
Internal Structure

Dimensions

Packing List
The default packing list without selecting any accessories is as follows:
| Item | Quantity |
|---|---|
| RadioCore | x1 |
| LoRa Antenna | x1 |
| Battery | x1 |
| RD01 Base Board | x1 |
| TFT Display | x1 |

FAQ
Q01Is RD01 compatible with Meshtastic and MeshCore?
No Reviews Yet
Customer reviews for this product will appear here when available.
Contact
Markdown is supported. Switch between editing and previewing your message.





