-
If your main board is RC32, enter bootloader mode with the steps below:Hold down the USER button, press the R button once, then release the USER button. After flashing, press the R button to reboot the device.
-
If your device is RC52, double-press the R button to enter DFU mode. Simply drag and drop the firmware file to the pop-up drive
RDC1 Pendant Mesh Networking RadioCore Gadget
Mesh networking gadget based on RadioCore, GNSS, pendant with a silicone casing, no battery, external power supply.
The RDC1 is a compact node built on RadioCore. It features a silicone enclosure, small footprint and great portability for easy carrying.
No battery included. Requires USB power supply (e.g. phone USB power adapter).
Note Please do not hang the device directly by the USB‑C port, as it may easily fall off. Use the metal ring in the middle of the lanyard for mounting to ensure secure attachment.
You May Also Like

RD-GB01 Mesh Networking RadioCore Gadget
Mesh networking gadget based on RadioCore, 18350 battery, GNSS, LoRa Mesh Node
$27.90
RD-GA01 Mesh Networking RadioCore Gadget
Mesh networking gadget based on RadioCore, nRF52840, 1.08 inch TFT display, 1800mAh battery, 9-axis IMU, GNSS, LoRa Mesh Node
$36.90
Mesh Node T1 LoRa Position Tag
nRF52840 + SX1262, 9-axis IMU, buzzer, GNSS and TFT display, IP65 protection, compatible with Heltec F&T, Meshtastic and MeshCore.
$39.90
MeshPocket V2 Qi2 Magnetic Charging Power Bank
Emergency Communication System, TFT display, GNSS, LoRa Meshtastic, MeshCore Compatible
$99.00Compare Difference
Current product
RDC1 Pendant Mesh Networking RadioCore Gadget
Summary
The RDC1 is a compact node built on RadioCore. It features a silicone enclosure, small footprint and great portability for easy carrying.
No battery included. Requires USB power supply (e.g. phone USB power adapter).
Note Please do not hang the device directly by the USB‑C port, as it may easily fall off. Use the metal ring in the middle of the lanyard for mounting to ensure secure attachment.

Structure

| Parameters | Description |
|---|---|
| Enclosure Material | Silicone |
| Power Supply | USB-C 5V |
| Lanyard | USB-C to USB-C |
| Antenna | PCB |
| Dimensions | 63.15×27.72×14.95mm |
| Weight | |
| Compatible MCU | RC32, RC52 |
Dimensions

Packing list
The default packing list without selecting any accessories is as follows:
| Item | Quantity |
|---|---|
| RadioCore | x1 |
| RDC1 Adapter Board | x1 |
| USB‑C Lanyard | x1 |
FAQ
Q01Failed to flash firmware:
No Reviews Yet
Customer reviews for this product will appear here when available.
Contact
Markdown is supported. Switch between editing and previewing your message.

