- Please note that the device must be placed outdoors in an open area. A position near a window is not sufficient.
- Please allow sufficient time for acquisition. The first GNSS fix may take longer in some regions.
- Check your software settings to confirm the function is enabled.
RD-GA01 Mesh Networking RadioCore Gadget
Mesh networking gadget based on RadioCore, nRF52840, 1.08 inch TFT display, 1800mAh battery, 9-axis IMU, GNSS, LoRa Mesh Node
RD-GA01 is an expansion board of the RadioCore series. It is compatible with the LoRa versions of RC32 and RC52. The board integrates a TFT display, 9-axis IMU, GNSS, Buzzer and other functions. It is equipped with abundant buttons and an onboard 1800 mAh lithium battery.
You May Also Like

RadioCore RC52
nRF52840,BLE, LoRa, Meshtastic, MeshCore, LoRaWAN
$15.90
RadioCore RCC6
RadioCore ESP32-C6 LoRa Wi-Fi BLE, Meshtastic, MeshCore, LoRaWAN
$8.90
RadioCore RC32
RadioCore ESP32-S3 LoRa Wi-Fi HaLow, Meshtastic, MeshCore, LoRaWAN
$9.90
RDC1 Pendant Mesh Networking RadioCore Gadget
Mesh networking gadget based on RadioCore, GNSS, pendant with a silicone casing, no battery, external power supply.
$20.90
RD-GB01 Mesh Networking RadioCore Gadget
Mesh networking gadget based on RadioCore, 18350 battery, GNSS, LoRa Mesh Node
$27.90
RD01 Smart Home RadioCore Gadget
Smart home gadget based on RadioCore, sensor slot kit for RC32
$34.90Compare Difference
Current product
RD-GA01 Mesh Networking RadioCore Gadget
Summary
RD-GA01 is an expansion board of the RadioCore series. It is compatible with the LoRa versions of RC32 and RC52. The board integrates a TFT display, 9-axis IMU, GNSS, Buzzer and other functions. It is equipped with abundant buttons and an onboard 1800 mAh lithium battery.
Specifications
| Parameters | Description |
|---|---|
| Enclosure Material | PLA(3D-printed) |
| Battery: | 104040 1800mAh Li-ion |
| GNSS Module | Quectel L76K (L1) |
| Display | 1.08 inch TFT |
| Antenna | Specification |
| Dimensions | 60×53×30mm |
| Antenna | Whip, SMA female |
| Compatible MCU | RC32, RC52 |
Internal Structure

Demension

Packing List
The default packing list without selecting any accessories is as follows:
| Item | Quantity |
|---|---|
| RadioCore | x1 |
| LoRa Antenna | x1 |
| Battery | x1 |
| RD-GA01 Base Board | x1 |
| TFT Display | x1 |

FAQ
Q01No GPS signal received
Q02Failed to flash firmware:
-
If your main board is RC32, enter bootloader mode with the steps below:Hold down the USER button, press the R button once, then release the USER button. After flashing, press the R button to reboot the device.
-
If your device is RC52, double-press the R button to enter DFU mode. Simply drag and drop the firmware file to the pop-up drive
No Reviews Yet
Customer reviews for this product will appear here when available.
Contact
Markdown is supported. Switch between editing and previewing your message.
