HELTEC image
HomeProductsWireless Stick Lite(V3)

Wireless Stick Lite(V3)

ESP32S3 + SX1262 LoRa Node, Meshtastic, MeshCore and LoRaWAN Compatible

BoardLoRaBLE/BT
01 / 04
$14.90

HTIT-WSL is a development board for Wi-Fi, Bluetooth and LoRa. Because some customers do not need OLED screen when using WiFi Lora32, we launched this product.

The HTIT-WSL is composed up of an MCU (ESP32-S3FN8) and Semtech LoRa Transceivers (SX1262), perfectly support Arduino®. Users can easily carry out secondary development and application.

You May Also Like

Compare Difference

Current product

Wireless Stick Lite(V3)

Summary

HTIT-WSL is a development board for Wi-Fi, Bluetooth and LoRa. Because some customers do not need OLED screen when using WiFi Lora32, we launched this product.

The HTIT-WSL is composed up of an MCU (ESP32-S3FN8) and Semtech LoRa Transceivers (SX1262), perfectly support Arduino®. Users can easily carry out secondary development and application.

Main Features

  • Microprocessor: ESP32-S3FN8 (Xtensa® 32-bit LX7 dual core processor, five stage pipeline rack Structure, main frequency up to 240MHz).
  • SX1262 LoRa node chip.
  • Type-C USB interface with a complete voltage regulator, ESD protection, short circuit protection, RF shielding, and other protection
  • Onboard SH1.25-2 battery interface, integrated lithium battery management system (charge and discharge management, overcharge protection, battery power detection, USB / battery power automatic switching).
  • Integrated WiFi, LoRa, Bluetooth three network connections, onboard Wi-Fi, Bluetooth dedicated 2.4GHz metal spring antenna, reserved IPEX (U.FL) interface for LoRa
  • Integrated CP2102 USB to serial port chip, convenient for program downloading, debugging information printing.
  • Support the Arduino development environment;
  • With good RF circuit design and basic low-power design (sleep current ≤800uA), it is convenient for IoT application vendors to quickly verify solutions and deploy applications;

Specifications

ParametersDescription
Master ChipESP32-S3FN8 (Xtensa®32-bit lx7 dual core processor)
LoRa ChipsetSX1262
USB to Serial ChipCP2102
Frequency433 ~ 510MHz, 863 ~ 928MHz
Max. TX Power21d B ± 1d B
Max. Receiving sensitivity-134dBm
Wi-Fi802.11 b/g/n, up to 150Mbps
Bluetooth LEBluetooth 5, Bluetooth mesh
Hardware Resource7 * ADC1 + 8 * ADC2; · 8 * Touch; · 3 * UART; · 2 * I2C; · 2 * SPI; etc.
Memory384KB ROM; · 512KB SRAM; · 16KB RTC SRAM; · 8MB SPI Flash
Battery3.7V lithium battery power supply and charging
Operating temperature-20 ~ 70 ℃
Dimensions58.08 * 22.6 * 8.2 mm
InterfaceType-C USB; 2 * 1.25 lithium battery interface; LoRa ANT(IPEX1.0); 2.4G ANT(IPEX1.0); 2 * 20 * 2.54 Header Pin

Pin Map

High light

Arduino-Compatible

We have done a lot of migration and development, made it perfectly support Arduino®, can run the LoRaWAN protocol stably.

1 / 2

Packing list

The default packing list without selecting any accessories is as follows:

ItemQuantity
Wireless Stick Litex1
LoRa Antennax1
1.25×2 Battery Connectorx1
Pin Map Stickerx1

Contact

Markdown is supported. Switch between editing and previewing your message.

Message0/5000
From
$14.90